Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2908303.

This was inspired by Fablab_Ideenreich's screwdriver wall mount, although I created it from scratch in Fusion 360.

This is for seven tools in graduated sizes.

Graduated wall tool holder x6

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4308879.

I purchased a CNC4Newbie Z Slider N23LC56XC (https://cnc4newbie.com/store/en/z-axis-slider/n23lc56-xcarve-slider-p93c37/) and found that the instructions do not mention that you will need to cut off part of the shaft of your original xcarve motor. I wasn't thrilled with having to cut my original part, so I made an insert that fills in the gap and allows the shaft to mount up properly without bottoming out on the part below.


xCarve CNC4Newbie Z Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2883931.

I wanted my filament sensor to fit below my extruder precisely. This mount let's it fit with a straight filament path on the 2020 rail.

Filament sensor mount - perfect fit for K280 (maybe others)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2883890.

I just wanted to connect lack side tables without screws. This one does it rather securely.

Lack Connector (no screws)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2914182.

Frustrated that my belts would occasionally adjust themselves, I decided to make some locks to keep them in their slots.

Belt Lock (HE3D K280)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2871644.

I assembled a HE3D K280 and found the glass bed has no brackets. The pictures I've seen online of folks using it show them taping the glass down with masking tape. So I came up with some small brackets that fit every other hole around the bed and hold it in place.

He3D K280 Glass-bed Bracket

Activity related to collaborating with others on models

Likes, comments, and activity from your community