These keys were all printed standing up with supports. I did not need to print a brim. standing up means the stabs that reach into the key are printed as strong as possible. 

These fit the Kailh low profile Choc V1 ordered directly from Kailh. That switch seem to be different than the switches on store bought boards that use Kailh switches. 

Keycaps for NNR, made for Kailh Choc V1 switches

1 unit key, you will need 42x of them for a NNR

1u Key v4.stl

This is all the parts needed to print the case, to include the backplate to hold switches and stiffen up the case.

cut outs for the PCB are left loose to allow tape to help isolate the PCB.

NNR (No Number Row) Case and Backplate

This is the left side of the plate that helps minimize flex within the PCB.

Plate Left v2.stl

I make things, sometimes they are good enough to share.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

thatguyisjames

Keycaps for NNR, made for Kailh Choc V1 switches

NNR (No Number Row) Case and Backplate