If you want to support the work I do you can join this tier of membership and get access to all my models for personal use. 

You also get access to Discord where you can have input on which models get made next. 

ThatCadKid

Access to all models ThatCadDad has designed.
**Commercial License** to sell all published models on all platforms while holding this membership.




ThatCadCousin

This is a commander size deck box based on the art for Icy Manipulator. It screws together. There is a tray file that is necessary to keep the deck in place in the box.

The Deck Cavity is 70mmx70mmx100mm. This will fit 100+ Single sleeved cards and a space for tokens and dice. This is printable without supports. 

Entire Icy Manipulator.3mf

This is a mini nuke deck box. The Deck Cavity is 77x77x100mm. This should fit most decks even double sleeved decks. The top screws on to the dice holder and the side holder sits on top of the deck box. I designed this to be supportfree. There is a long bridge that will be needed on the dice holder. Let me know if you would like to see a version with magnets. 

Fallout Mini Nuke Deck Box.3mf

I wanted to make a Fallout Nuka Cola Vending Machine Deck Box. This fits a double sleeved 100 card deck with a spot for dice. You will need magnets to make it close. You should be able to use any 8mmX2mm. You can try this amazon listing for magnets below. For the hinge of the door you can use any 1.75mm filament. Thats standard size.

https://www.amazon.com/FINDMAG-Refrigerator-Magnets-Premium-Whiteboard/dp/B08C4SQSM3/ref=sr_1_4?crid=28M9QOR3A336E&dib=eyJ2IjoiMSJ9.3GCl2epYZyXOVRcCWRF6hturYbXikVnjNIqM221Cy-wxBstl0sgvWPFy5obMSVB-SVn-06RV9F9x-NWvQ1k40nAKV_BF2MYz01D2Zts5M6lSxsHc3RaFym5zBUu2sRGNylDwLmkL1B_haGwpSEvwTBtQyAd2GT1_jHC8H1POHyiFgkdf8bHo_KD7TlBtz9HudtDlplysoOC1RqtUVfZp2iDCToVWc6dJfp971sX7Y8s.KnbJpQzYZuA-P2pxMqinIYdw0Nq6WyhD8t7yOZTGGJc&dib_tag=se&keywords=neodymium%2Bmagnets%2B8mm%2Bx%2B2mm&qid=1710877104&sprefix=neodymium%2Bmagnets%2B8mm%2Caps%2C125&sr=8-4&th=1

Nuka Cola Vending Machine MTG Commander Deck box

Lid.stl

Nuka Cola Main Deck Box.stl

This deck box was inspired by the new set Bloomburrow. It is a an Acorn. The top screws off to reveal your deck. This box fits 100 double sleeved cards or 100 single sleeved and a bunch of dice.

This prints without supports. Make sure the bed is very clean so the bottom portion stays stuck to the bed the entire print. The box should not fall over with a deck and dice in it.

I used bambu lab matte dark brown and matte beige filament

TG COMMANDER ACORN DECK BOX SQUIRREL

acorn box finished.stl

Acorn Lid.stl

Finished Acorn Box.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

thatcaddad

Achievements

Seedling

Traveller

Explorer