I wanted to design a vertical storage solution for my CXA Tool Holders. The tree is the result of that effort. I saw a similar design on Ebay and thought that it would be a good basis for the design. A few hours in Inventor and this was born.

No supports required. Print flat on build plate. Countersinks are properly bridged.


CXA Aloris Dorian Tool Holder Storage Tree with 3030 Extrusion

CXA-holder-v3.stl

I purchased some used Huot cabinets, but the dividers were past their useful life. Printed these up and good as new. Let me know if anyone has issues.

https://www.youtube.com/watch?v=6OyJD-idC5o


Huot style endmill organizer trays

endmill-organizer.stl

A simple 5C storage solution. It is Tileable in all directions with a slight upward tilt. Not much else to say. Print flat on build plate, no supports.
Print Settings

Resolution:
0.20

Infill:
20

Filament brand:

Fusion Filaments

Filament color:

Sievert Silver

Filament material:

HTPLA+


5c_collet_rack-v2.stl

Based on the work of Frank Hoose (https://www.youtube.com/watch?v=onTinLAdUO0) I created a 3d printable version. Glue the spacers on and start super sucking.

UPDATE: 2021.10.31:
Uploaded a loose version for some people having trouble with fit. please let me know if this solves or if further refinement is needed.

UPDATE: 2021.11.06:
Added a deeper version per request. And separated files.


T-slot super sucker

mill-t-slot-super-sucker_loose.stl

I needed a solution to my growing endmill collection. Let me know if you have any suggestions or modifications needed.

UPDATE: 2021.11.12
Added a video showing the organizers in action. https://www.youtube.com/watch?v=LMa34tmubSo

Endmill, Reamer, Drill storage boxes

I needed a solution to my growing endmill collection. Let me know if you have any suggestions or modifications needed.


drill_storage_v3.stl

Deburring tool holder and wall storage.  Designed to hold hex and round deburring tools, blades, and blade packages.

Deburring tool storage and holder

I couldn't find a good balancing fixture for balancing grinding wheels for my bench grinder and soon to own surface grinder.

Print two sides (same part no mirror, just double on the buildplate)
Hardware:
1x 12mm rod
4x 608 skateboard bearings
4x m8x40 bolts.

Pretty simple to setup, two versions, regular and short, short saves printing time and plastic if you want to mount the sides onto a piece of wood.  The fit of the bearings needs to be loose, so a file may be needed depending on your printer or print the loose version.

balancing-fixture.stl

balancing-fixture-short-loose.stl

balancing-fixture-short.stl

balancing-fixture-loose.stl

This is a test bench / jig or the Prusa MK3 (R2 and Bear) variants. I wanted to test a bunch of fans and cooling shrouds. Taking apart the printer every time became rather tedious. With the help of https://www.thingiverse.com/pekcitron/about, who graciously designed the jig for the Bear extruder, I created the R2 jig and base platform to mount both variants to.

Simply print out an extra extruder and you can hook up the hotend test bench into your existing Einsy. This prevents you from having to disassemble the wiring harness for running benchmarks, etc.

Feedback is always welcome and let me know of improvements!

Step files for R2 and base included.

I do this for fun and no support is required. However, people have requested a place to donate. if you want to donate use my PayPal or use an amazon affiliate link:
https://amzn.to/3c3d5ou

Prusa MK3 & Bear Hotend cooling jig and test bench

bear_test_jig_0.6.0_hotend_cooling.stl

I wanted to add another layer to my enclosure, but I didn't need to have glass. I remixed the Prusa enclosure pieces to provide the same easy to remove design, but without the glass insert sections.

I do this for fun and no support is required. However, people have requested a place to donate. if you want to donate use my PayPal or use an amazon affiliate link:
https://amzn.to/3c3d5ou


Prusa i3 Enclosure No Glass Attachment

Prusa_Enclosure_No_Glass_Corner.stl

I did not want the track on both sides of the track, so I created this remix to have a solid bottom. For everything else see original thing here: https://www.thingiverse.com/thing:346569

I do this for fun and no support is required. However, people have requested a place to donate. if you want to donate use my PayPal or use an amazon affiliate link:
https://amzn.to/3c3d5ou


one-sided_wood_track_V2.stl

I saw a few different Peanuts ideas, but no coasters. 
Layer change after 2.4cm

All rights to Peanuts.

I do this for fun and no support is required. However, people have requested a place to donate. if you want to donate use my PayPal or use an amazon affiliate link:
amzn.to/3c3d5ou


Peanuts Coasters

snoopy.stl

Expanding on my previous storage wall, https://thangs.com/termlimit/Various-Stackable-Storage-Boxes-12926, I am creating a dedicated thang for paint storage.  I have three types of paint, Vallejo Model Air 17ml, Testors Enamel 7.4ml, and US Art Supply ~30ml.

I wanted to create a system that is neat and takes up as little horizontal space on my desk.  Thus I created this system to allow me to organize and see what I have at a glance.

I am always open to ideas and other paint sizes. Let me know in the comments if you have a specific paint in mind or on-hand as well as dimensions of the bottle and I can generate a storage box for the wall.

I enjoy seeing your makes, please keep them coming!

UPDATE: 2020.12.06
Added Citadel pots with a diameter of 33mm.  Keep those requests coming, I have a few more in the queue to complete, but will add any requests.

UPDATE: 2021.01.10
Added BoxMiddleMiddle_2.5x1x1.5_paint_store_vallejo.stl per request. More to come.

I do this for fun and no support is required. However, if you want to donate use my PayPal or use an amazon affiliate link:
https://amzn.to/3c3d5ou

Stackable Paint Storage System

BoxMiddleMiddle_3x1x1.5_paint_store_vallejo.stl

Thanks to https://www.thingiverse.com/STTrife for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up for more details. Feel free to hit me up if you have questions or other variations. I have a couple more coming, but need to finish printing them to make sure they are good to go.

UPDATE: 2021.10.28
Added a YouTube short to show my current setup. https://www.youtube.com/watch?v=ASDMnH8LPd0

Stay tuned for more!
termlimit

I do this for fun and no support is required. However, if you want to donate use my PayPal linked through Thingiverse or use an amazon affiliate link:
https://amzn.to/3c3d5ou

Various Stackable Storage Boxes

BoxBottomMiddle_2x1x1.STL

Introducing Fridgee!! Your favorite benchie thing's remixed into refrigerator magnets. The Cali Dog is chopped in half and a hole is created for an 8x3mm magnet. Simply print and glue/press-fit in the magnet and snap on your refrigerator. Simple and effective. Now you can annoy your wife and show off your printing prowess!

Start printing today. Check back for more of your favorite things!!

I do this for fun and no support is required. However, people have requested a place to donate.  if you want to donate use my PayPal or use an amazon affiliate link: https://amzn.to/3c3d5ou

Fridgees!

Benchy Fridgee.STL

Building on the work of ShopNation, I wanted to organize my new workshop and homelab. I spent the better part of the a week printing, customizing, and labeling these organizers for my Husky tool chest. I really like the color-coded concept as well as the modular nature that they provide.

I did notice that my slicer was importing the STL files he provided incorrectly scaled, I fixed it for all the versions I used as well as my custom creations.

I will release the step files once I hear back from ShopNation, I want to make sure he is OK with it.

Please let me know if you have questions. This was a fun and ongoing print. 5 more drawers to go, hopefully!

UPDATE: 2021.01.20
Added 40x120.stl, 40x100.stl, 100x240_box.stl, and 80x140_box.stl and new picture with some of those printed for all my connectors and crimpers.

I do this for fun and no support is required. However, people have requested a place to donate. if you want to donate use my PayPal linked through Thingiverse or use an amazon affiliate link:

https://amzn.to/3c3d5ou

Print Settings

Printer brand:
Prusa

Printer:
i3 MK3

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20%

Filament brand:
Fusion Filaments

Filament color:
See notes

Filament material:
HTPLA+

Notes:

I used 870 Sievert Silver, Reactor Red, Radium Green, and Plutonic Purple

Various Hardware Organizer Boxes

1x2_box.stl

Here to create and have fun. If you want to support please purchase from my affiliate link here: https://amzn.to/3c3d5ou

paypal.me/termlimit for donations.

https://www.youtube.com/channel/UC6UNzmqaH3mfLUQltJtHvfA

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like