Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6236517.

Generative wall mount holder for my rocket, should be able to hold about 10 lbs. Holder is for a ~3 in body tube. 

Generative Design Wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5980136.

Take an old bike grip and turn it into something useful with a bag holder.
When printed with ~5 walls and ~35% infill on PLA I was getting at least 10 lbs held for each hook when moving around. 

Bag Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5334114.

These are some leaf earrings that I modeled in Fusion 360, it isn't based on any specific type of tree leaf or anything. 

Leaf Earrings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5277299.

These are the floating rings that I designed that are meant to be worn into earrings but could be made otherwise. Scale to your preference. 

Floating Rings earring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4864278.

Just a simple open pyramid I wanted to upload. I might make something more of it later. You can use it as a building block for something else if you want. 

Open pyramid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4857236.

Just a simple straw holder that I made. Nothing complicated about it, no support needed. 

Straw Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3995719.

I designed these earrings as either a logo/earring design. If you want to make it an earring, scale the z to around 2mm tall. I wanted to help support awareness towards the cause. 

You will need to scale overall to the size desired. 

Dravet Syndrome Earrings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3746137.

Just a Phone stand with a wireless charging holder

Space available is 90_90_12.5 for the wireless charger

Phone Stand with Wireless charging holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5264751.

Nose Cone, I designed using a Fusion 360 plugin. Made to be a tight fit for a 66 mm cardboard tube. Made to be printed in TPU. I printed it with 4 walls which seemed to be a bit overkill so you can likely get away with 2. Tested many times with no problems when using 95A and 85A shore hardness. 

Model Rocket Nose Cone for 66mm cardboard tube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4174254.

Simplistic design of a double triangle earring which takes around 15 minutes per pair. 

Triangular Earring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4565127.

Just a fairly simplistic earring 

Triple Ringed Earring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5176593.

Hello, this is BRRDS, (Best Rocketry Research Determination System), a high-power rocket developed at NCSSM over the past 3 years from 2019 and launched in late 2021. 

The purpose of the rocket was for research but really being able to go supersonic and high altitude. The Rocket reached Mach 1.3 (~997 mph) and 11,973 ft in altitude on an L1000W motor. 

The model I have provided is a near copy of the original OpenRocket file with some adjustments that have changed from design to actuality. The design was not originally intended to be 3D printed but can be with scaling modifications of the parts. 

If you would like to learn more about our team and the rocket itself you should check out our website, https://rocketry.ncssm.edu/

BRRDS (Best Rocketry Research Determination System)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4162814.

This is a simple teardrop-shaped earring. The models are a little big (70mm) long so you might want to scale down a little. Thank you for taking a look at my design!

Teardrop Earrings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4977075.

A model heart I designed with an example pulse in the middle. I originally designed this as an earring but can be used as décor too depending on usage and scale. 

Heart with Pulse

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3880558.

These are my second version of earrings. The inner piece spins freely. You might need to alter the inner piece rotation depending on slicer because it might not generate supports for the 2 cylinders, I printed it standing up and didn't need supports. 

Gyroscopic Earring 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3819261.

This is a remake of a Fox 40 which is not 100% made to scale. It does not have any fine details but has most parts of the Shock Absorber.

Fox 40

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5264738.

This is an Altimeter bay I designed with a 66mm cardboard rocketry tube in mind. Made to fit a PNut altimeter. When printed it weighs only about 12 grams when compared to a filled-in model at about 30 grams depending on settings 

Lightweight PNut Altimeter Bay for 66mm tube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4857244.

This is a Hip replacement model I designed for a course in modeling a replica hip replacement. DO NOT USE THIS MODEL FOR AN ACTUAL HIP REPLACEMENT, I AM NOT A PROFESSIONAL. Let me know tho if you do try.

Replica Hip Replacement

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4975910.

This is a hard print as it even failed on an industrial printer. You will likely need to scale up for a successful print. 

Caduceus (Symbol of Medicine

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4898459.

A model of Corsair HS60 headphones not made to exact scale but somewhat close. Made for a CAD course. 

Corsair HS60

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4857240.

Just make sure you watch how you print it with the supports, it can be a bit weird. 

Open Box earrings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3900273.

Here is a connectable coaster set which is set to go up to a 9 piece set. The connections are easily removable but is strong enough to not fall apart when easily moved. Feel Free to change the code to make a larger set. 

Connectable Coasters

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4619289.

This is a project I worked on for the #studentdesignchallenge. I used Fusion 360 to create this model. The purpose of this is to declutter the space of anyone from students to adults used to make their space more efficient and have fewer things lying around. The front of the object can be used as a phone or tablet stand as it was designed largely to accommodate more devices. To the right of the model are 2 hooks used to hang earbuds onto. Underneath and behind the phone stand are multiple layers used to put items lying around, the bottom-most layer perfectly fits an average-sized sticky note. You can also use this to have other items attached like an eraser or extra pencil lead. Attached to the model is also a large pen/pencil holder. You can use this to hold around up to 10 pens/pencils and is even large enough to fit a highlighter. I did not have any problems during the design of my object, only what to and not to include like a pen holder or the mini stands for other objects to be placed upon. If I could redesign this again, there would be little I would change other than aesthetics. Something I might do would give this to others and ask what they would change. 3D printing strengthened this design by providing a way to test the object to make sure everything worked well like being stable enough. 

Multipurpose Phone Stand #studentdesignchallenge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5264755.

66mm to 55mm Model Rocket transition that was made for cardboard tubes. The shoulder sizes are different due to the original requirements of the model. I used 4 walls to fill in the walls which seemed to work well when tested many times. The PLA survived the ejection charges well with no problem and received little to no damage when landing, just a little dirt. 

66mm to 55mm model Rocket Transition

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4857238.

Some earrings that I designed which I though resembled the shape of a near dragon egg. 

Dragon Egg Earrings

https://paypal.me/DonaldGemmel?country.x=US&locale.x=en_US

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

tamedtech

Achievements

Seedling

Debutant