Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4699593.

yet another wow stick case design. just a basic easily pocketable design that uses the magnets from the original case or ant standard 3mm magnet. optional strap 

Bigger Case For Wow Stick electric screwdriver

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4613444.

Lamp shade (MUST BE PRINTED IN VASE MODE) 

scale to desired size 

This is a remix of the MESMER vase by Bugman_140 on Prusaprinters.org

(REMIX!!) geometric Lamp shade 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4695171.

simple mounting plate for shower head with double-sided tape

compatible with standard shower head mounts

Shower head Mounting Plate .

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5907144.

simple hot end plate to replace stock caution label. should fit many different models, can be scaled to fit other hot ends 

attached with VHB tape 

Hot End Decorative Plate for Anycubic Mega, Mega s, and others 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4606083.

basic cup/vase with chevron pattern, must be printed in vase mode or it will print solid 

Chevron Cup or Vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4641086.

sound bar design I did up to make use out of an old pair of pc speakers that no longer worked

I added a picture of the set of speakers i used but you could substitute your own speakers and amplifier board from amazon. there is even plenty of room for a battery inside 

I did not include a back for the cabinet but you can do what i did and use a piece of acrylic or very easily design your own back!  

speaker dimensions 

tweeters(midrange) - 50mm diameter 

Woofer - 100mm diameter 

external DIM: W-300mm X H-120mm X D-100mm

broken down into 2 parts and re-connected using 3d pen.  also has a tong and grove to re-connect 2 parts but if you printer is not 100% accurate you'll probably just want to cut that off and glue together 

Soundbar from Logitech Speakers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4695094.

A simple Snap On truss that will work for the Anycubic Mega Series. 

Is very strong and I made it so the even the biggest size can fit on the regular I3 Mega at an angle  

i have also included my camera mount that can be adapted for different uses 

Clip on Accessory Mounting Truss For Anycubic Mega Series 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4699557.

I am Too lazy to put my coat on a hanger every time i come home so I made these hooks to snap onto my closet pole to hang my coats 

Coat hook For Pole/rod

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5337060.

simple carry case for kardia single lead 

print upright without supports, raft reccomended 

Alivecor Kardia keychain carry case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4695117.

Simple Resizable Lithophane stand. adjust length by scaling it only on the Axis that corresponds to its length

this works best if you have a 3mm thick frame around your Litho. to do this easily just put a black border around the image prior to importing into cura   

customizable Lithophane Stand 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4643004.

The box that will finally allow you to give a fuck

FUCK box .

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4606815.

100% that that bitch keychain, has rim for resin pour

100% that Bitch Keychain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4899161.

Replacement foot for the Logitech MK320 wireless Keyboard

print flat side down with 100% infill (supports required) 

Logitech MK320 Keyboard Foot

Replacement foot for the Logitech MK320 wireless Keyboard

print flat side down with 100% infill (supports required)

yet another wow stick case design. just a basic easily pocketable design that uses the magnets from the original case or ant standard 3mm magnet. optional strap

wowstick_1.STL

I am Too lazy to put my coat on a hanger every time i come home so I made these hooks to snap onto my closet pole to hang my coats

Coat hook For Pole-rod

simple mounting plate for shower head with double-sided tape

compatible with standard shower head mounts

Shower head Mounting Plate

Just a Fun little Fidget Toy Project

Customize and remix as you wish!

Pocket Gears

BACK_PLATE_v2.STL

this is version 2.1 of my wall gears project

it is a kinetic sculpture project consisting of several sizes of gear wheels

I created a custom backplate for the gear box to turn the dual motor gear box into a single motor unit

I recommend adding some sort of rubber feet to the back of the fame to reduce noise transfer into the wall, i just used generic 3/4" grommets

its a good idea to use some silicone grease on all the pivot points and in the gearbox

parts list

frame: https://canada.michaels.com/en/grey-shadowbox-by-studio-decor/M20001818.html?dwvar_M20001818_size=16%22%20x%2020%22&dwvar_M20001818_color=Grey

switch: https://www.digikey.ca/en/products/detail/te-connectivity-alcoswitch-switches/4-1825136-8/1021809

velleman motor: https://www.velleman.eu/products/view?id=437496

Tamiya Motor: https://www.amazon.ca/dp/B001Q13BIU/?coliid=IS356GNQQU2T6&colid=2IGANTE7G4IQO&psc=1&ref_=lv_ov_lig_dp_it_im

4XAAA battery holder: https://www.thingiverse.com/thing:456900/files

UPDATE

Added pre-shelled gears for use if you are unable to print in vase mode (mainly for non FDM printers)

also added smaller gear size

3D PRINTING SETTINGS
gears are printed in vase/ spiralized mode with standard bottom layer thickness of around 1.45mm

gearbox should be printed at 100% infill, if your printer is not well calibrated to will have to do some post-processing work to make the shafts fit. I just heated up the shafts/bushings with a torch and pushed them into the plastic for a perfect fit

the only thing that will need supports is the switch cover an its only a 10 minute print anyway

Wall Gears V2.1

50_tooth.STL

VERSION 2 AVAILABLE ! check my page

This is my wall original wall gears project,

-I have included 2 sizes of stands(hubs) of the gears one will make the gear almost flush with the wall the other will make it stand about 10mm away from the wall, as well as a 10mm spacer for more height.

-you can make it manual or powered, i have included a shaft to make it powered I used a gear mechanism pulled out of an older IDE CD-ROM drive to power mine. unfortunately it is unlikely you will be able to find the exact same mechanism I used, but I have included the shaft and gear box just encase.

3D PRINTING SETTINGS
-the gears must be printed in vase/spiralized mode with the default base thickness for curia which works out to around 1.45mm

Wall Gears

gear.stl

Simple Resizable Lithophane stand. adjust length by scaling it only on the Axis that corresponds to its length

this works best if you have a 3mm thick frame around your Litho. to do this easily just put a black border around the image prior to importing into cura

customizable Lithophane Stand

A simple Snap On truss that will work for the Anycubic Mega Series.

Is very strong and I made it so the even the biggest size can fit on the regular I3 Mega at an angle

i have also included my camera mount that can be adapted for different uses

Clip on Accessory Mounting Truss For Anycubic Mega Series

The box that will finally allow you to give a fuck

sound bar design I did up to make use out of an old pair of pc speakers that no longer worked

I added a picture of the set of speakers i used but you could substitute your own speakers and amplifier board from amazon. there is even plenty of room for a battery inside

I did not include a back for the cabinet but you can do what i did and use a piece of acrylic or very easily design your own back!

speaker dimensions

tweeters(midrange) - 50mm diameter

Woofer - 100mm diameter

external DIM: W-300mm X H-120mm X D-100mm

broken down into 2 parts and re-connected using 3d pen. also has a tong and grove to re-connect 2 parts but if you printer is not 100% accurate you'll probably just want to cut that off and glue together

 Soundbar from Logitech Speakers

helical/herring bone gear pattern Vase, can be printed as is (1mm wall thickness) or can be printed in Vase/Spiralized mode

 Helical Gear Vase

mounting kit for Chinese hot air- rework station

Heat Gun Mounting Kit

mounting kit for Chinese hot air- rework station



heat_gun_psu_mount.stl

Lamp shade (MUST BE PRINTED IN VASE MODE)

scale to desired size

This is a remix of the MESMER vase by Bugman_140 on Prusaprinters.org

(REMIX!!) geometric Lamp shade

100% that that bitch keychain, has rim for resin pour

USB 3.0 plate for 3.5" bay

basic cup/vase with chevron pattern, must be printed in vase mode or it will print solid

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

spekerdude

Achievements

Sapling

Fan Favorite

Bigger Case For Wow Stick electric screwdriver

(REMIX!!) geometric Lamp shade

Shower head Mounting Plate .

Hot End Decorative Plate for Anycubic Mega, Mega s, and others

Chevron Cup or Vase

Soundbar from Logitech Speakers

Clip on Accessory Mounting Truss For Anycubic Mega Series

Coat hook For Pole/rod

Alivecor Kardia keychain carry case

customizable Lithophane Stand

FUCK box .

100% that Bitch Keychain

Logitech MK320 Keyboard Foot

Logitech MK320 Keyboard Foot

Bigger Case For Wow Stick electric screwdriver

Coat hook For Pole-rod

Shower head Mounting Plate

Pocket Gears

Wall Gears V2.1

Wall Gears

customizable Lithophane Stand

Clip on Accessory Mounting Truss For Anycubic Mega Series

FUCK box .

Soundbar from Logitech Speakers

Helical Gear Vase

Heat Gun Mounting Kit

(REMIX!!) geometric Lamp shade

100% that Bitch Keychain

USB 3.0 plate for 3.5" bay

Chevron Cup or Vase