Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3802434.

I wanted a comb to mix colors and resins while in the VAT or to search for remnants of a failed print.

There are plenty of models but none I thought could be printed in FDM. So I created one for FDM and one for a resin printer (fits smaller bed size). Also I wanted to add the Elegoo logo since I'm using that machine. 

Elegoo Resin Comb

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2456467.

It's a protest sign "No Maduro"  In solidarity with the Venezuelan people struggling. Cool for using multiple colors on a single extruder. 

I designed it to have a dirty look but as you can see, you can print it plain if you time it right on multi color print or if you paint it.

Based on a banner I see in the protests being waved by the participants.

No Maduro (Venezuela)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1636637.

This is a remix of the Money Cat created by bs3

UPDATE 11/8/18: I remade the bank and added a plug in the bottom so you don't have to break the bank to open it. Also the walls are thinner (but still strong) and uses much less plastic to print. If the plug is too tight, you can print it at 99% - that will depend on the tolerance of your 3D printer. (More pictures added also)

My daughter really loved the regular design but kept shoving dollars into the bottom and many didn't fit, so she had a fit (she is 3 years old)

I decided to take the money cat and make it bigger, seal the bottom and add a slit on the back of the head to add dollars. 

My daughter is really happy now ;-)

maneki-neko -money cat - Big Bank

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3112898.

This is my version of a stand for my Wowstick 1F+ for the 64pcs set. I took what I liked from djalmaribeiro's and Picaboubx's versions and put them together.

In my print, I discovered the tolerances were a little too tight so I had to sand a little. I adjusted the model to give more space .

UPDATE: I added models sized 102% for those who want to avoid any tolerance issues and sanding. 

There is 2 pieces to print, the base and the clip which attaches to the base (glue or no glue, up to you) and then clips onto the wowstick to keep it steady. (see pics)

There is 2 versions of the base, one with the Wowstick logo and one without. 


Wowstick Stand for 1F+ 64pcs set

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1977356.

I remixed the front cover with a Pentagram and a skull in the center. I also remixed the back cover's side panel  - removed logos and went with the word "Relinquo" - which means to "Relinquish" in Latin.

Get the rest of the book from ClassyGoat excellent original design - http://www.thingiverse.com/thing:775824

Pentagram w/Skull & Relinquo cover Deck Box Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2006176.

This a remix of the Flying saucer by gpvillamil. I wanted something to cover the lightbulb in my basement bathroom. 

I modified the files to create the cavity where the lightbulb can fit. I attached the two sides using 3M velcro tabs. 

The model is designed to fall over the light so you MUST use LED lightbulbs or print with a plastic that can handle the heat of another type of bulb. (I would seriously just do it with LED though. keep it safe)

Flying Saucer LED lightbulb fixture

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2564430.

I wanted a Dominoes tray for game play. I originally printed the versions available on Pinshape but found they were larger than necessary and used too much plastic to print. 

UPDATE: I added a version that spells it out "Capicua"

I set out to design a lighter version with a smaller footprint that is stable enough for a moving table (people I play with get very excited) 

I was inspired by Felix Garcia's version -https://www.thingiverse.com/thing:1873271

Dominoes Capicu Tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2347051.

This is a replica of a Taino Figure Tiki I got in the Dominican Republic when I was a Teenager. It has been with me for a long time and kinda became a good luck trinket. This is based on the Dominican Taino Dreamcatcher Figure which was discovered painted in caves in the south of the country. (apparently keeps evil away so you only have good dreams) Before I got into 3D printing I always wanted a duplicate of it but never found it again. Now I made it myself and I can replicate as much as I want.  

Dominican Taino Tiki

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2234963.

This is a little homage to the Working Man's Professor, Dr. Cornel West. It's a good model to use if you want to test switching filament mid-print or setting processes to change filament in simplify3d.

Cornel West Tribute Frame

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1829756.

This is a new hotend carriage for the Zonestar D810 3D printer to hold two cooling fans. 

D810 Hotend Carriage Attachment for 2 Cooling Fans

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3077391.

It's a remix of my Dominican Taino Tiki but with the hole and the setup to be a easy pendant to wear. Good to use if you like the minimalistic fashion style.

Dominican Taino Tiki Pendant (closer to the original)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4549785.

This is another Elegoo Mars adapter for the Anycubic Wash Cure Station. There are other options available but I wanted one that didn't take much vertical space and can be flipped upside down to get even taller models washed. 

Also by connecting on the screw you can attach it to the build plate while it's still on the printer. Eliminating a chance you are going to spill resin in the wrong place while you are trying to attach the adapter. 

Anycubic Wash Cure Adapter Elegoo Mars

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sonnydr1075

Achievements

Seedling