Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2594021.

I wasn’t really happy with the spool holders I’ve tried on here, so I created a spool holder to attach to the metal bracket that came with the CR-10. You’ll need to purchase a 6” M8 bolt and nut(5/16 may work as well) as well as two 608 bearings.

 You’ll need to print:
             - 2 of the 25/70Spoolholder
             - 2 washers
             - 1 nut
             - 1 bracket mount

CR-10 spool mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2791252.

Used these as templates to create push sticks. Printed them out, taped them to 3/4" ply or MDF and ran them through my router table.

Push Sticks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4808025.

Attachment for the Stihl E61 vacuum to the Makita LS0714 Mitre Saw

Stihl E61 Vacuum to Makita LS0714 Attachment

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4090194.

Customized version of https://www.thingiverse.com/thing:953781

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=953781



Pipe End Cap (58mm ID)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3182712.

Wall mount for the mitre guide for the Makita track saw.

 Tolerances could have been a bit tighter in the width, but it's functional.

Makita Mitre Guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2791282.

3/16 Trim gauge used to set the reveal around doors and windows.

3/16 Trim Gauge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2930084.

The spacers can be used to install laminate, vinyl plank, engineered wood, or any floating flooring product. These floor spacers will ensure that your installation maintains the expansion gap between the floor and your wall as required by your flooring manufacturer.

Flooring T-spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3323986.

Box inside dimensions are 45mm (height) x 59mm (width) x 19mm (length)

Used double sided tape to mount.

Digital Angle Gauge mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2996379.

Cats paw wall mount.

Cats Paw wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4750650.

35 degree bevel guide for  https://www.thingiverse.com/thing:4626160

35 Degree micro bevel plane guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2791262.

Template used to make braces I use during glue up. It's a fairly large print at 11 3/4"x11 3/4"

Right-Angle Clamping Brace

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

sobflooring