Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108436.

I generated a 4 color STL of the Forest Path with the amazing HueForge program. I used Green/Yellow colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

The print details and layers filament changes are in the describe note file as well as bellow.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite Yellow Transmission Distance: 11
PLA Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #7 at 0.64mm
Green until layer #11 at 0.96mm
Yellow until layer #20 at 1.68mm
Cloud White for the rest.
 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Forest Path

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108421.

I generated a 4 color STL of the Demon Skull decal with the amazing HueForge program. I used red colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

The print details and layers filament changes are in the describe note file as well as bellow.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polylite Black Transmission Distance: 0.3
Polylite Red Transmission Distance: 7.5
Polylite Yellow Transmission Distance: 11
Polylite White Transmission Distance: 6

Swap Instructions:
Black until layer #6 at 0.56mms
Red until layer #11 at 0.96mms
Yellow until layer #18 at 1.52mms
White until layer #20 at 1.68mms
 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Demon Skull

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108424.

I generated a 4 color STL of the Samurai Girl with the amazing HueForge program. I used Red colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #7 at 0.64mm
Wine Red until layer #12 at 1.04mm
Yellow until layer #16 at 1.36mm
White for the rest.
 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Samurai Girl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108439.

I generated a 4 color STL of Demon Slayer Giyu with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Azure Blue until layer #9 at 0.8mm
Aqua Blue until layer #17 at 1.44mm
Cloud White for the rest.

 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Demon Slayer Giyu

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108431.

I generated a 4 color STL of the Tiger Face with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Polylite Azure Blue Transmission Distance: 3
PLA Polylite Aqua Blue Transmission Distance: 3
PLA Polyterra Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Azure Blue until layer #8 at 0.72mm
Aqua Blue until layer #16 at 1.36mm
Cloud White for the rest.


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Tiger Face

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108414.

I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polylite Black Transmission Distance: 0.3
Polylite Azure Blue Transmission Distance: 3
Polylite Aqua Blue Transmission Distance: 2.5
Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #4 at 0.4mms
Azure Blue until layer #5 at 0.48mms
Aqua Blue until layer #12 at 1.04mms
Cloud White until layer #17 at 1.44mms
 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

V2:

I made a V2 in red and yellow colors because I wanted to tweak some layer heights and how that you can use any color you want for these models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Polylite Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Yellow Transmission Distance: 11
PLA Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #4 at 0.4mm
Red until layer #7 at 0.64mm
Yellow until layer #13 at 1.12mm
Cloud White for the rest.

HueForge Dragon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108403.

I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints. 

The print details and layers filament changes are in the describe note file as well as bellow. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polylite Black Transmission Distance: 0.3
Polylite Azure Blue Transmission Distance: 3
Polylite Aqua Blue Transmission Distance: 3
Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #6 at 0.56mms
Azure Blue until layer #12 at 1.04mms
Aqua Blue until layer #20 at 1.68mms
Cloud White until layer #23 at 1.92mms
 

The slicer software i used was Bambulab and the printer is the Bambu X1 carbon with AMS

 

keep and eye out if your interested in more HueForge models I plan to upload many more 

Thanks

HueForge Snake

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108442.

I generated a 3 color STL of the Mandalorian with the amazing HueForge program. I used greyscale but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

The print details and layers filament changes are in the describe note file as well as bellow.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #7 at 0.64mm
Grey until layer #16 at 1.36mm
White for the rest.
 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Mandalorian

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108443.

I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #6 at 0.56mm
Azure Blue until layer #8 at 0.72mm
Aqua Blue until layer #13 at 1.12mm
White for the rest.

 


The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

 

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks

HueForge Blue dragon 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5510895.

Aquarium feeding ring shaped like a fish. 
feeding ring is used to provide a place to feed fish and let light in when floating plants are used in an aquarium.

Aquarium Feeding Ring Fish 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5475994.

This is a suction cup aquarium planter I designed for small plants to be planted on the glass of the tank. This is very useful if you desire to plant a aquarium plant that needs a different substrate or if your plant needs to be raised out of the water. it can also look nice to have a smaller plants raised up from the substrate.

I designed the suction cup holder for the Fluval® Tube Bracket Suction Cup

I printed this model in both PETG and PLA both came out great.

I used 0.25 layer height draft but it should print fine with any layer height. (prusa mini) 

Support free with the top against the build plate.

Aquarium planter suction cup

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

snakegreen88

Achievements

Seedling

Debutant