Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6146342.

Refrigerator thermometers from the hardware store slide into these stands to improve stability or to allow them to be viewed from above when placed in the cheese drawer or bottom freezer. The end of the metal base slides under the rails on the printed stand to provide a snug fit.

I found 2 problems with the thermometers inside my refrigerator:
1. They would constantly tip over due to the center of gravity being so close to the front edge. Any light tap or if the doors were shut with any force would knock them over. 
2. The dial is not easily visible when placed in the cheese drawer or bottom freezer.

My solution was to design a stand that would stabilize the thermometer by extending the base forward, and to design another stand that would allow the dial to be viewed from the top.

Link to refrigerator thermometer for reference:
https://www.lowes.com/pd/Frigidaire-Universal-Refrigerator-Thermometer-Chrome/1004991

Print recommendations:
Print the front facing stand in the vertical direction and with brim enabled. I set the brim width to 10 mm. The top facing stand does not require any special settings.


Refrigerator Thermometer Stands

This is a remix of the "Hercules & Diomedes Classical Sculpture" model on Sketchfab uploaded by jetblaque69:
https://sketchfab.com/models/49a61d6810c14ae0b724e7691b3d92d2

This remix makes the model 3D printable. The original model from Sketchfab was imported into Blender and converted to an STL file. In Fusion 360, the bottom was capped off to make a manifold volume and scaled to be ~100mm tall. A spurious string was removed and filled on Hercules's right calf.

The "_edit" STL contains the above changes. The "_orig" STL has no edits, it is the direct conversion from Blender.

Additional information about the actual sculpture:
https://www.florenceinferno.com/hercules-and-diomedes/

https://en.wikipedia.org/wiki/Diomedes_of_Thrace

Hercules and Diomedes Sculpture

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6110475.

This is a cup holder adapter for an H2 Hydrology 22 oz water bottle in a 2015 Hyundai Sonata. The water bottle fits loosely inside the cup holder and can fall out while driving. This design stabilizes the water bottle by filling the gap which keeps it from falling out.

Water bottle: https://www.amazon.com/gp/product/B07T34HDTP

This must be printed using a flexible filament like NinjaFlex TPU since the adapter has a snug fit against the water bottle (slight inference). The adapter may need to be raised or lowered on the water bottle to get the proper fit inside the cup holder: raise to loosen fit, lower for tighter fit.

Step (.stp) and Fusion 360 (.f3d) files are included to make it easier to modify.

Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108929.

Pokemon Poke Ball style wall plate for Leviton Decora rocker style light switch or outlet. Similar dimensions as the off-the-shelf wall plate:
https://www.homedepot.com/p/Leviton-Decora-1-Gang-Wall-Plate-White-R52-80401-00W/100036991

This is designed to be a multi-material print. I printed this using a Mosaic Palette 2 and was sliced in PrusaSlicer with P2PP. It was printed with the face against the build plate to avoid using supports.

Individual STL files are provided for each part. The 3mf file contains all 4 parts. Step (.stp) and Fusion 360 (.f3d) files are included for easy modification.

Pokemon Poke Ball Wall Plate for Leviton Decora Style Switch and Outlet

Pokeball Wall Plate for Leviton Decora Style Switch and Outlet

Pokeball_Wall_Plate_All.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6108816.

This chip clip design uses an actual 3D scan of a set of teeth for the jaws. The clip assembly is 100% 3D printed, the spring clip needs to be printed twice (1 for each side). The spring clips slide into the grooves on the jaw and roof, slide them unit the groove on the spring engages with the retention hump inside the groove (there will be a click).The clips will need to be opened slightly to get them in place. I measured about 1 kg of clamping force, however, the force will ultimately depend on the material used for the springs.

Each STL is a single body. Reorient the parts in the slicer so that the large flat surfaces are against the bed - teeth pointing up. Print the springs on the side. The multicolor print was made in PrusaSlicer 2.6.0 using the new "multlimaterial paint" feature. The PrusaSlicer 3mf file is included with the teeth painted to make that step easier.

I recommend printing the springs with PETG because PLA will lose its springiness over time since it is under constant load. 

I also included an Step file of clip assembly without the teeth for easier remixing.

Mouth Chip Clip from 3D Scan of Teeth

Roof.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6094213.

Pikachu holds your watch while you're not wearing it. I designed this watch stand to hold a specific Pokemon watch, but it's possible for it to work with other watches. I included step and Fusion 360 (.f3d) design files to make it easy to remix. Pikachu was traced from an image that was shamelessly pilfered from a google image search. The tail was designed to hold the watch. Design was done in Fusion 360.

This was intended to be printed using a multi-material setup. I printed Pikachu and the base separately using a Creality CR-10 and Mosaic Palette 2 (4 colors). Pikachu was printed with the face against the build surface to minimize filament use on the transition tower. The base was printed with the top against the build surface to avoid using supports.

I sliced the models using PrusaSlicer 2.5.2 with P2PP using the .3mf files which contain all bodies that make up each object. I found the .3mf files worked best in PrusaSlicer since it automatically aligned all bodies and the correct names for each body were also brought in. Simplify3D 4.1.2 was not able to correctly separate the bodies of the .3mf files. I also included separate .stl files of all bodies which can be used with any slicer. Most popular slicers should be able to align the origins of the models to correctly assemble them for printing.

Pikachu mounts to the base using 2x M4 fasteners, a length between 8 mm and 20 mm will work.


Pikachu Watch Stand for Pokemon Watch

Pikachu_Watch_Holder_STEP.step

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6088725.

This design is a headphones holder for Alesis DM10 Studio electronic drum rack. I mounted it a 37 mm vertical tube of the rack, so it should work for any tube that has a 37 mm diameter. I use Vic Firth isolation headphones, so your mileage may vary on what headphones will work. This holder clamps to the bar using 2x M4x20 mm fasteners and 2x M4 nuts. M4 nuts fit into the 2 hex recesses.

You will need:
2x M4x20 mm button head socket cap fasteners
2x M4 nuts

I recommend printing with PETG to avoid loosening over time which tends to happen with PLA under constant load.

I shared a STEP file in addition to the STL for easy rework incase anyone is interested.

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6084692.

I modified the Spaceship Earth model to hold an Amazon Echo Dot (2nd gen). Holes were added to let sound out of the bottom mounted speaker and a hole was added to access the USB and audio jacks on the back side.

To align the cover with the pattern on the base, align the hole that cuts down through the bottom of the cover with the center of the USB/audio cut-out on the base. See photos.

The base can be printed in either orientation, both require supports. I printed it upside down so the supports were on the interior.

The cover should be printed right side up. The interior cavity is conical to avoid supports and reduce filament. The conical section inside has an overhang, so be mindful in your slicer.

Remixed from "Spaceship Earth from Disney World's Epcot" by SnickerdoodleFP, Thing:3084118 (full Spaceship Earth STL)
https://www.thingiverse.com/thing:3084118

6/19/23: Added STL file of design (same as original OBJ file)

6/26/23: Added STL for top half. Holes added (similar to base) to allow sound to reach the microphones on the Echo. The holes also allow the light ring to be visible.

7/15/23: Added STL for a base with no sound holes, intended for those that don't use the internal speaker. Make sure you download the correct one. If you use the internal speaker use the "with sound holes" STL. The cover STL will work for both base versions.

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand with Cover

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand

Spaceship_Earth_for_Echo_Dot_w_Sound_Holes.stl

Spaceship Earth for Echo Dot w Sound Holes_Cover.stl

Spaceship Earth for Echo Dot NO Sound Holes.stl

Jaw.stl

Jaw_Roof_PrusaSlicer_2.6.0_Multicolor_P2PP.3mf

Spring.stl

Pokeball_Wall_Plate_Face_Border.stl

Pokeball_Wall_Plate_Face_Lower.stl

Pokeball_Wall_Plate_Face_Upper.stl

Pokeball_Wall_Plate_Plate.stl

https://www.thingiverse.com/sj3dprints/designs

https://www.printables.com/@sj3Dprints_417557

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sj3Dprints

Achievements

Seedling

Debutant

Pinned models

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand with Cover

Mouth Chip Clip from 3D Scan of Teeth

Pokemon Poke Ball Wall Plate for Leviton Decora Style Switch and Outlet

Refrigerator Thermometer Stands

Hercules and Diomedes Sculpture

Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata

Pokemon Poke Ball Wall Plate for Leviton Decora Style Switch and Outlet

Mouth Chip Clip from 3D Scan of Teeth

Pikachu Watch Stand for Pokemon Watch

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand with Cover