Meet ZIDLICKA, the epitome of modern design and engineering! This 3D printed stool, with its sleek white finish and intricate gyroid infill pattern, seamlessly blends strength and style. Perfect for adding a touch of contemporary elegance to any space, ZIDLICKA is not just a stool, but a statement piece that showcases the beauty of geometric design. Whether you use it as a side table, a plant stand, or extra seating, ZIDLICKA promises to be a conversation starter and a functional addition to your home. Tested at static short-term load of 85 kg at a 3 wall lines and 15% gyroid infill 100% scale PETG print, however, final strength strongly depends on your print material and settings. Original dimensions 210x210 mm. The files include various gyroid thickness, so you can find the most suitable one for your settings, scale and nozzle diameter. I used the 1.2 mm thickness to print with 0.4 mm nozzle on 0.3 mm layer height. I used no supports. Print UPSIDE DOWN. Turn OFF the supports to avoid them getting stuck inside the gyroid!