This is a boom mount based off a remixed design of a micro all-in-one analog FPV camera (the sub $20 amazon kind) CASE that I added mounting brackets to. This attaches to a boom arm, which attaches to a base. 
The case is a pretty cool design that uses zipties to hold it in place.
NOTE: The tiny LED screen on the FPV camera comes on the back left or right depending on the manufacturer. Mirror the left and right sides to get new left and right sides if you need to switch them
I use this in my FMS K5 to get a better view when driving FPV. 
No supports needed
     Just had to clean up the left and right side cases.

Micro all-in-one FPV boom mount

Boom arm.stl

Should fit most micros. I used this on my FMS fcx24 K5 to add some space between the rc4wd rims I want to use, and the portal axles. 

There are two versions. One is dimensioned exactly the the stock adapter, the other has added tolerance for easier fitment. Print one of each (~3 minutes) and see which fits better for you.

I used PLA+ from polymaker, but I also printed on in LW PLA for funsies and it worked fine, so use whatever filament you want. 
Let me know if you have questions or need a different size.

7mm Hex +6mm (extension)

7mm Hex +6mm.stl

J-hook for command strips or screws (holes are 4 mm). 

J-hook.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

shaughntreilly15

Achievements

Seedling

Micro all-in-one FPV boom mount

7mm Hex +6mm (extension)

J-hook.stl