This model stores the [PITTSBURGH 3/8 in., 1/2 in. Drive Metric Hex Socket Set, 9 Piece](https://www.harborfreight.com/9-piece-38-and-12-drive-metric-hex-bit-socket-set-67880.html) socket set

Sockets are oriented vertically at 90 degrees with ample support around them to ensure they don't fall out when shutting drawers.

Thanks to [Zach Freedman](https://thangs.com/designer/ZackFreedman) for sharing the gridfinity standard, and open source file used to create this design.


Gridfinity PITTSBURGH 3/8 in., 1/2 in. Drive Metric Hex Socket Set, 9 Piece holder

Metric Hex Socket Set.stl

This model stores the [Harbor Freight 1/4 in. and 3/8 in. Drive Star Bit Socket Set](https://www.harborfreight.com/14-in-and-38-in-drive-star-bit-socket-set-9-piece-67914.html).
Sockets are oriented vertically at 90 degrees with ample support around them to ensure they don't fall out when shutting drawers.  

Torx socket sizes are labeled in recessed lettering within the socket storage holes.

Thanks to [Zach Freedman](https://thangs.com/designer/ZackFreedman) for sharing the gridfinity standard, and open source file used to create this design.  

Gridfinity Pittsburgh pittsburgh 1/4 in. and 3/8 in. Drive Star/torx Bit Socket Set holder

pittsburgh torx bit socket.stl

Gridfinity [Pittsburgh impact socket holder](https://www.harborfreight.com/38-in-12-in-drive-sae-metric-impact-socket-set-37-pc-68011.html) set modeled using [Zach Freedmans socket holder models](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Ratchet%20%2B%20Socket%20Holders-60906?manualModelView=true&utm_source=youtube&utm_medium=video&utm_campaign=zack_f).

These are non-stackable when populated with sockets.  The 1/2 inch socket holders are too wide to fit on a 200x200 print bed, but due to the grid system these models can safely be cut in half in your slicer software.


_There is a minor error with the small metric model that causes the largest socket to leave a slight small hole in the wall, i may fix this in the future, but for now it'll work fine._



Gridfinity Harbor Freight PITTSBURGH impact socket holder

impactbigimperial.stl

Modified [ZachFreedman's](https://thangs.com/designer/ZackFreedman) minimal Gridfinity grid design to fit on a prusa mk3 bed at 5x5

See source here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925

frame5x5.stl

Modified @ZachFreedman's minimal Gridfinity grid design to fit on a prusa mk3 bed at 5x5

See source here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

scrud

Achievements

Seedling

Trailblazer

Up and Coming

Gridfinity PITTSBURGH 3/8 in., 1/2 in. Drive Metric Hex Socket Set, 9 Piece holder

Gridfinity Pittsburgh pittsburgh 1/4 in. and 3/8 in. Drive Star/torx Bit Socket Set holder

Gridfinity Harbor Freight PITTSBURGH impact socket holder

frame5x5.stl