Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4409048.

Great original build, however mine kept on leaning backwards. I just added on a clip to keep it from doing so. I see that someone else had the same problem and made a clip for it. Wish i had seen that before i redesigned and reprinted mine lol. Anyway here it is.

Update July 6: Since i moved my extruder to the back rail of my frame, i remixed my previous version to make the New Hot end support file with a smaller footprint, and separate slots for wires and bowden tube. Both files still available in the download.

Update July 31: Bowden tube recess is moved forward to not incur any bend (as per request)

Print head cable relif with integral clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4360120.

I had made some wire clips that i found on Thingiverse to attach to the frame of my Ender 5, but they were all loose and slid down the upright, ir just not what i wanted. Some of them seem to have a low modulus (had some spring to them) which i liked. I did a complete rebuild from scratch of what i liked, i made it fit snug so it would not fall on the vertical frame, and included a square slot to hold a small utility knife or tool.

New Dual tool version found here: https://www.thingiverse.com/thing:4510680

Ender 5 - Knife/Tool Holder 40mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4367505.

I was looking for an Endoscope holder (8mm), and none of the current ones were to my liking. So here is my build. It is made to fit on the 20mm upper front support of my Ender 5, and i printed a side saddle for a touch less height on my setup so it doesn't interfere with the light bar above it. Hope this does the trick for you, as it did for me.

Updated saddle to clip on easier and hold tighter.

Printer brand:
Creality 

Printer:
Ender 5

Supports:
Yes for saddle

Resolution:
Fast Print Speed

Infill:
15

Filament_material:
PLA

Endoscope Holder and Saddle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4409061.

I broke the clip for this microscope, and this is the replacement. Hole is not threadded, but is the right size to thread in tripod screw tight.

Supereyes Microscope Replacement Mini Tripod Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4360134.

I had an old round Ikea LED light that I thought would work great to light up the hot bed on my printer. I also wanted to put a switch on the plug, and attach it to the printer frame. this is what i came up with.

Ender 5 - Switch Bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4510680.

A derivative from my single tool holder found here: 
https://www.thingiverse.com/thing:4360120

Found this to be more space effective.

40mm Knife & Snip Holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4409025.

Took the bracket and chopped off the bottom, mixed it with the clip i designed, and this is the result! Clipped it to the bottom rail between the power switch and micro SD slot of My Ender 5. The marks on the front are from support removal.

Temp/Humidity Gauge Clip

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sanman