3D model description This is a newer style dice guardian I've been doing lately. I started it off with a miniature file and edited it a bit, and came out with this. It holds a standard sized 22mm D20, even a bit bigger or smaller.

I did this only with filament. I used 3 colour shifting filament. It hasn't been properly cleaned, coated and finished yet. This is straight off the plate, I haven't removed the brim.

3D printing settings 3D printing settings For my 3D printer, I used the Anycubic Kobra 2 Neo. I use Lychee as my slicer and used the default settings for 0.200mm layer height and 1.75mm filament. I didn't change anything. I did learn how to add a brim because things were coming off the plate - my plate is pretty slippery sometimes. A brim is optional.

This is 63x65x67 mm. It takes 2hr 24 min to print, uses 10.7m of filament and weighs 32.06g if you print in place with a brim set to 15. Brim is optional, YMMV.

You can print in gray, slap on a primer (I use Rust-Oleum) and paint over, or print in various colours. I've done all of the above. I also added a top coat of Modge Podge glossy on top of every one I've made, painted or not. You can sand it down.

I used all the default settings for layer height, infill, etc.