Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4905328.

This is a simple design mostly for glass whiteboards that utilizes suction cups to keep it in place. 

Print with the back side facing down at a 45° angle. 

There is a magnetic version that contains captive magnets to be able to use on a traditional magnetic whiteboard. 

[Suction Cups](https://www.amazon.com/gp/product/B08VNW833N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) (1.77 Inches / ~45 mm)

[Magnets](https://www.amazon.com/gp/product/B00HA2ARZO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) (10mm X 3mm)

**Note: I highly recommend rare earth magnets as they will be strong enough to hold the shelf up.**

**Pro Tip:** Add custom gcode at **Layer 20** to automatically pause the print to insert the magnets. 
**GCODE: `M25`**

Suction Cup/Magnetic Dry Erase Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4861731.

Some accessories and finishing touches for https://www.thingiverse.com/thing:1738504.

I added a magnet so the door will not fall out. https://www.amazon.com/gp/product/B07QFHGZZF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The windows are press fit and should not require glue. There is a .2 tolerance on the windows. As long as your printer is well tuned there should be no issues pressing them in. Note that there is a slight difference in the original model on the left window that is slightly smaller than the rest. 


TARDIS Jewelry Box V 2.0 - Signage/Accessories

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4740312.

This is a remix of https://www.thingiverse.com/thing:4632689

Added some distance on the clip. If you have the Creality BLTouch metal bracket this should fit perfectly! This should work on an ender 3/3 pro as well. 


Hotend Strain Relief - Ender 3/3 Pro/5/5 Pro - BLTouch

This is a holder for your scrub daddy! This allows you to mount it inside your sink.

The suction cup holes measure 14mm (outermost diameter)  to 10 mm (inter diameter). See the example suction cup measurement image included.  

The specific ones I used are:  https://www.amazon.com/gp/product/B08VNW833N/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

NOTE: Before printing, check to see if your sponge will fit in this model by verifying a few dimensions (see one of the included images for dimensions).

Happy Printing!

Scrub Daddy Caddy

scrub_daddy_holder_v2.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

samwiseg0

Suction Cup/Magnetic Dry Erase Shelf

TARDIS Jewelry Box V 2.0 - Signage/Accessories

Hotend Strain Relief - Ender 3/3 Pro/5/5 Pro - BLTouch

Scrub Daddy Caddy