1 lane 45d corner.3mf

This is a Track section compatible with Tamyia Mini 4wd and should print to specification with Tamiya Mini 4wd 2 lane track sections including the ablity to clip them together

1 lane 115mm IR 90 Corner.3mf

Tamiya Mini 4WD Small Build Tray

a small tray to build your Tamiya mini 4wd car in. the large section complies with the max dimensions allowed for cars while the walls are short enough to allow you to work on the car, but high enough to prevent the car, or small parts from rolling away. Also has 5 small trays for holding bits.

GridFinity - Geprc 1c Battery Box.3mf

A 2 cell Gridfinity Bin to hold Geprc 1c Batterys

2 Lane 45 degree Lane Split.3mf

This is a 350mm long 2 lane to two single lane tracks with a 45 degree 115mm inner radius turn on on lane. This can be used to take a lane into an inner track section. Suggested to Mirror the file so you can return the tracks from single lanes to a 2 lane track

Mini 4wd Verification Box.3mf

This is a verification box to Tamiya mini 4wd spec as of may 20 2023

3 lane 350mm Straight Track.3mf

This is a 350mm long straight section of track compatible with Tamiya mini 4wd. you will need a 400mm x 400m printer for this file.

3 Lane to 2 plus 1 Lane Split 80mm.3mf

This is an 80mm long Track section to split a 3 lane track to a 2 lane track and 1 lane track. Compatible with Tamiya mini 4wd

2 Lane Fly over Lane Switch Ramp.3mf

This is a 2 lane fly over lane switcher ramp 350mm long compatible with Tamiya mini 4wd. to make a full flyover you will need to print two of these and then 1 regular and 1 mirrored fly over lane switch to make a complete lane switcher

2 lane 115 Inner Radius 90 degree corner 15 degree bank.3mf

This is a 350mm long 15 degree banked 90 degree corner compatible with Tamiya mini 4wd. 

2 Lane Straight 350mm.3mf

This is a 350mm long 2 lane Straight compatible with Tamiya mini 4wd

2 Lane 12.5 Degree Bank.3mf

This is a 2 lane banking section compatible with Tamiya Mini 4wd it is 120mm long. it has a lip on the banked section to facilitate holding the section of track being angled. 

1 lane straight track 350mm.3mf

This is a single Lane 350mm long section of track compatible with Tamiya Mini 4wd

1 Lane 75mm ramp 350mm long.3mf

This is a single Lane 350mm long track section compatible with Tamiya Mini 4wd. it raises the elevation by 75mm

Tamiya Mini 4wd 2 lane flat 90 corner with mid support

this is a 35mm 2 lane corner track with an inner radius of 115mm. it is compatible with Tamiya Mini 4WD 2 lane track, has track clip towers to lock with regular track

rucdoc

Achievements

Trailblazer

Fan Favorite

Sequoia