I found this voronoi watch stand a couple years ago on Thingiverse ( [https://www.thingiverse.com/thing:4723752](https://www.thingiverse.com/thing:4723752) ). I've created a base and repurposed it for my google mini. 

Hope you like it!

-------------------------------------
 
**3D PRINT SETTINGS***

Material: Eryone PLA - transparent

Print Temperature: 220°C
Bed Temperature: 67°C
Print direction: as is when you drag it on the bed
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.20 mm
Infill: 15%
Build plate adhesion type: none

-------------------------------------------------------

**Check out all my account or follow me on social for new 3d model drops:**
**[**ALL ACCOUNTS**](https://linktr.ee/room4ideas)** 

-------------------------------------------------------

Base for Voronoi Hand Stand

Base for Voronoi Hand Stand.stl

I have downloaded this moss pole on thingiverse (https://www.thingiverse.com/thing:4935209) . It's great, but the moss kept on drying out quickly and watering it without removing it was a pain. So I created this funnel to slow drip into the moss. Now I just fill the funnel and that's it. 

Hope you will like it! Happy printing!

Please post a make or share it on your social channel if you like it!


------------------------------------------------

**3D Print Setting**

Once it's printed I used a push pin to pierce one small hole in the middle. 

Material: Eryone wood PLA
Print Temperature: 230°C
Bed Temperature: 70°C
Print direction: as is when dragged into bed
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.20 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim or raft

-----------------------------------------------------------------

**Check out all my account or follow me on social for new 3d model drops:**
**[**ALL ACCOUNTS**](https://linktr.ee/room4ideas)** 

--------------------------------------------------------

Dripping funnel for moss pole

Moss pole watering funnel.stl

I picked up a used Ikea Detolf glass cabinet. It was very wobbly as the back bracket was broken. So I have created some new brackets. Also I didn't like how high the door handle was located. 

I have printed 6 brackets and one door handle for it.
Hope you will like it! Happy printing!

-------------------------------------
 
**3D PRINT SETTINGS***

Material: Eryone PLA - transparent

Print Temperature: 220°C
Bed Temperature: 67°C
Print direction: as is when you drag it on the bed
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.20 mm
Infill: 15%
Build plate adhesion type: might need a brim, I have printed all 6 at once and some popped off the bed.

-------------------------------------------------------

**Check out all my account or follow me on social for new 3d model drops:**
**[**ALL ACCOUNTS**](https://linktr.ee/room4ideas)** 

-------------------------------------------------------


Brackets for Ikea Detolf glass cabinet

Ikea Detolf back bracket.stl

**1. COMMERCIAL LICENSE**
You have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from my Designs on any platform of your choosing. My digital files are NEVER for resale. This plan grants you the right to print and sell all room4ideas models while subscription is active.


**2. FULL ACCESS**
You will have full access to all 3D models I have created and uploaded.


**3. ONE DESIGN A MONTH**
I will upload at least one new design a Month


**4. REQUEST FOR NEW DESIGNS**
I am always open for requests and suggestions, just message me and we can chat about it.


**5. CONNECT AND SUPPORT**
As I print prototypes before uploading all my files, you will have access to my Exclusive Discord Chat where you can get valuable printing support, submit future design ideas, share your prints, and chat directly with me!


With your help we can create more beautiful things! I really appreciate your Support - Thank you!


**COMMERCIAL LICENSE ✓
FULL ACCESS ✓
ONE DESIGN A MONTH ✓
REQUEST FOR NEW DESIGNS ✓
CONNECT AND SUPPORT ✓**

Thanks,

Witt

****
**This plan grants you the right to print and sell all room4ideas models while subscription is active. It doesn't grant you to sell the files.**
****

Suite

Geometric bullet shape planter for 4" pots. No draining holes as you just insert the 4" plant pot into it. Files come with a planter with holes for people who can't do macrame as well as a solid version. No support needed, print it upside down (pointy side up).  This model comes with 2 plant stands for use as non-hanging planter.  Design 3 of 3.
Hope you like it!  Happy Printing!

If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files **[Cults3D](https://cults3d.com/en/users/room4ideas/3d-models)** .

------------------------------------------------

**3D Print Settings:**

Required build volume: 175x180x185 mm
Material usage: 99.5m
Print time: 9h on Ender 3 V2

Print the stands upside down.
If it doesn't stick to bed use brim or raft. 

Material: PLA
Print direction: upside down, pointy side up
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.28 mm
Outer walls: 3
Infill: 15%
Extra Skin Wall Count: 2
Build plate adhesion type: none

-------------------------------------------------------
Find all my online accounts here:
**[ALL ACCOUNTS](https://linktr.ee/room4ideas)** 

-------------------------------------------------------

Bullet Planter Pot 3 - hanging planter + stands

Bullet Planter 3.stl

Bullet Planter 3 w holes.stl

Bullet Planter 3 solid.stl

Plant stand 1.stl

Plant stand 2.stl

Japanese inspired planter, small size  (2 inch) for cuttings or succulents. Clouds pattern. Design 3 of 8 of the Japanese planter series.

Hope you like it! Happy Printing!

Please post a make or share it on your social channel if you like it!

If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files [Cults3D](https://cults3d.com/en/users/room4ideas/3d-models).

---------------------------------------------

**3D Print Settings:**

Material: Eryone wood PLA
Print Temperature: 230°C
Bed Temperature: 70°C
Print direction: flat
Support: none 
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.20 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

-------------------------------------------------------
Find all my online accounts here:
**[ALL ACCOUNTS](https://linktr.ee/room4ideas)** 

-------------------------------------------------------

Succulent Planter Japanese Style - Clouds/Kumo V1

japanese pot clouds.stl

Planter pot laser cut style inspired. 
All parts printed flat =>No glue or support need.

-----------------------------------------------------

Planter for 4" pots. No draining holes as you just insert the 4" plant pot into it. It has a tray to catch the water, but also elevated so the pot doesn't sit in water. Print the top base, the bottom base and the tray and 31x of the bars. the tray screws into the base so you don't have to print supports. Try to screw in and out the tray to the base a couple times to loosen up the imperfections of the print, depending on the filament you might have to help and add some oil or grease to it.

Make sure you keep the in mind the top and the bottom of the bases when assembly it as the cuts are angled and facing one direction.

Hope you like it! Happy Printing!

Please post a make or share it on your social channel if you like it!

If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files [Cults3D](https://cults3d.com/en/users/room4ideas/3d-models).

------------------------------------------------

**3D Print Settings:**

Material: PLA or PETG

Print direction: flat
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height: 0.28 mm
Infill: 15%
Build plate adhesion type: none

-------------------------------------------------------
Find all my online accounts here:
**[ALL ACCOUNTS](https://linktr.ee/room4ideas)** 

-------------------------------------------------------

Planter Pot 3 - laser cut style

planter pot 3 tray.stl

planter pot 3 bars 31x.stl

planter pot 3 bottom base.stl

planter pot 3 top base.stl

Say goodbye to spills and hydrate efficiently during your outdoor activities with my SUP drink holder 3D model on Thangs.com - your streamlined solution for ingenious and functional 3D designs, making it an excellent companion for paddle board users.
Fits normal and tall cans as well as skinny water bottles.

Hope you like it! Happy Printing!

Please post a make or share it on your social channel if you like it!

If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files [Cults3D](https://cults3d.com/en/users/room4ideas/3d-models).

-------------------------------------------------------

**3D PRINT SETTINGS** 


**Print time:** ~2hrs at 100% printed on a K1 Max. 
**Filament usage:** ~20 m / 60 g
**Material:** PETG
**Print direction:** as is when dropped on build plate
**Support:** no
**Nozzle size:** 0,4 mm
**Line width:** 0,42 mm
**Layer height:** 0.24 mm 
**Infill:** 15%
**Build plate adhesion type:** none

-------------------------------------------------------

Find all my online accounts here:
**[ALL ACCOUNTS](https://linktr.ee/room4ideas)** 

------------------------------------------------------- 


Paddle Board Drink Holder

SUP drink holder.stl

Hi my name is Witt,

I am a graphic designer by trade and creator/inventor and crafty person by night.

"It takes 10 000 hours to master a skill" I've heard - so here we go! One day I will get there but in the meantime I hope you will enjoy my creations. By supporting me you are helping me to make these ideas come to life! I am so grateful for the support!

**All my designs have been test printed at least once by me before the upload, to ensure they are printable. **

You are not quite ready for a subscription yet, then check out my online profiles for other options or follow my social channels
https://linktr.ee/room4ideas

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

room4ideas

Pinned models