Planter pot laser cut style inspired. All parts printed flat =>No glue or support need.
Planter for 4" pots. No draining holes as you just insert the 4" plant pot into it. It has a tray to catch the water, but also elevated so the pot doesn't sit in water. Print the top base, the bottom base and the tray and 31x of the bars. the tray screws into the base so you don't have to print supports. Try to screw in and out the tray to the base a couple times to loosen up the imperfections of the print, depending on the filament you might have to help and add some oil or grease to it.
Make sure you keep the in mind the top and the bottom of the bases when assembly it as the cuts are angled and facing one direction.
Hope you like it! Happy Printing!
Please post a make or share it on your social channel if you like it!
If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files Cults3D.
3D Print Settings:
Material: PLA or PETG
Print direction: flat Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height: 0.28 mm Infill: 15% Build plate adhesion type: none
Find all my online accounts here: ALL ACCOUNTS