Boost your indoor gardening experience with my advanced 3D model on thangs.com. The "Watering stake for moss poles mushroom shape" falls under our "Home/Gardening" category and significantly enhances the automatic drip irrigation system for your moss pole. Offered as style 2 amongst three different designs, this 3D model ensures that you never have to see your moss dry out again.
I've created this stake to slow drip into the moss. You just fill the mushroom and it seamlessly waters your indoor moss pole.
Hope you like it! Happy Printing!
Please post a make or share it on your social channel if you like it!
If you don't want to commit just yet, please find my Cults3D profile to direct purchase the files Cults3D.
3D PRINT SETTINGS
Once it's printed I used a pushed pin to pierce a small hole at the bottom middle of the model after printing. Although my models are designed to be watertight, the final result may vary based on the filament and print speed.
Print time: at 100% ~ 4.5hrs on a K1 Max. Filament usage: 17 m / 52 g Material: PLA or PETG Print direction: rotated to the side but not touching built plate with tree support like shown on picture(this worked best for me to make them water tight) Support: tree supports Nozzle size: 0,4 mm Line width: 0,42 mm Layer height: 0.12 mm Infill: 15% Build plate adhesion type: none
Find all my online accounts here: ALL ACCOUNTS