I wanted to try using an artificial intelligence that converts subtitles to audio in the video I uploaded and it worked, so I uploaded it this way, I hope you like it. :)))

 

The second version of the foot design to prevent vibration for the Creality K1 3D printer is much better and sturdier than the first version.

I'll post the montage video here when it's uploaded to youtube.

the legs have names and each leg must be assembled according to the name

4 M3X25 screws 12 pcs M3X 12 screws

ANTI VIBRATION FEET K1 V2

Front right.3mf

Since the Display stand for Star destroyer designed by fab365 was paid, I made my own stand. Hopefully it benefits your business. You can print without requiring support.

Display_stand_for_Star_destroyer

Display_stand_for_Star_destroyer.3mf

The K1 was designed to prevent vibration at high speeds, and I designed it to prevent this. I hope you will like it. It does not prevent the ventilation of the motherboard and power supply. You do not need to remove the bottom cover.

The support is only required where the rubber feet shown in the last picture will be attached.

16 pieces M3*35 to connect the parts together
and you can use the original screws for the rubber feet.

I hope you will like it.

ANTI-VIBRATION FEET K1

Creality K1 Assembly - Alpha v0.01 v5_Creality K1 Ayak v3_Front left.3mf

A piece to gain extra space by using the coffee table legs. Can be printed with 40% infill

ikea coffee table table fixing

Body1.stl

https://www.thingiverse.com/thing:2590838 and https://www.thingiverse.com/thing:3466026 remiks 

https://www.thingiverse.com/thing:2590838 The screw holes in the handlebar mount in the file were too weak and were strengthened. The spring system in the file https://www.thingiverse.com/thing:3466026 was used. There are two versions of the lock mechanism, one is the original one and the other is a version made to make it a little stronger, I used both of them, but the second version holds it a little more solidly. I recommend you to wash it with PET-G or ABS+. 

materials you need: 1 piece M3 30 screw 1 piece M3 nut 4 piece M3 10 screw 4 piece M3 nut There are parts that require support but are easy to remove after printing. I use it on my bike now and I am very satisfied. 

Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament brand: Filament material: PETG

quadlock bicycle

Locking_mechanism.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

resimkulubu

Achievements

Seedling

Explorer

Debutant

ANTI VIBRATION FEET K1 V2

Display_stand_for_Star_destroyer

ANTI-VIBRATION FEET K1

ikea coffee table table fixing

quadlock bicycle