This is a holder for 1" pegboard holes that holds those quart size food containers you commonly get from to go orders at restaurants.  Oh the irony in using plastic to recycle/reuse other plastic.  There are two sizes included, 100mm and 105mm.  These fit all the containers I've come across.

Pegboard holder for to go quart food containers

food_cup_holder_100mm.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4564875.

This is an angled mount for a Unifi G3 Flex camera.  I used this to mount a G3 Flex on a roof soffit.  Note that Ubiquiti does not recommend mounting these cameras upside down when outdoors.  Consider which way you need the camera to face when choosing the flipped vs not-flipped file.  The Fusion 360 file is included and fully parameterized so you can adjust the angle if needed.

Unifi G3 Flex Angled Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4679673.

This is a mounting rail for the 5.25" cage in an Antec P180 case.  These will likely work on other Antec cases of the same era and style, such as the P183.

The 5.25" frame in the pics comes from here: https://www.thingiverse.com/thing:4117845

This will print without supports as long as you print it on its side.  I've only tested it with a .6mm nozzle and .35mm layers, but I think it'll work fine with any nozzle and layer height.

Antec P180 5.25" mounting rail

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4763736.

This is a mold for making snow bricks, designed to use only a small amount of plastic, yet still be sturdy.  I would definitely use PETG over PLA for this if you have some.  I usually use [Overture PETG](https://amzn.to/3bbfKL1) with my mk3s and just use the Prusament settings.

Snow Brick Maker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4559114.

Slide on soft jaws for the [Yost 445 4.5" bench vise](https://amzn.to/33gEf7m)

I printed these in [Overture TPU](https://amzn.to/3fmGjNq) which has worked well in my Prusa mk3s.  I use the Sainsmart TPU profile in Prusa Slicer, but adjust the Max Volumetric Speed to 1.2mm/s (Filament Settings -> Advanced).  Temperature set at 225C.

Soft vise jaws for Yost 445

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5212461.

This is a right angle vacuum hose adapter to connect a Vacmaster hose to a Dewalt DWS715 miter saw.  This is designed to be a female to female adapter, with a 42mm inner diameter on the long side, and a 45mm inner diameter on the short side.  The short side is actually modeled at 45.5mm, but due to the maximum overhang you're going to have a bit of sag and rough bridging at the top.  You can, however, print this without any supports.

Step and Fusion360 files are included for easy adjustment of parameters, but you may have to mess with the inner fillet if you drastically change the measurements.

42mm to 45mm inner diameter right angle vacuum adapter for Dewalt Miter Saw to Vacmaster hose

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

randomdood

Achievements

Seedling