Unleash enigmatic charm with 'Sphinx's Lash'—a 3D-printable, mystique-inspired chain design perfect for creating statement jewelry or decorative elements with a touch of antiquity.

Printing Settings

• Filament Material: PLA
• Layer Resolution: 0.2 mm
• Infill Percentage: 15%
• Supports: No
• Brim: No
• Bed Temperature: 60°C
• Nozzle Temperature: 210°C

Printing Information

• Nozzle Size: 0.4mm
• Estimated Printing Time: Approximately 10 hours 15 minutes
• Print Volume: 168mm (width) x 186mm (depth) x 208mm (height)
• Printer Used: Prusa i3 MK3S
• Slicing Software Used: PrusaSlicer

Additional Information Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.