Flexible Scalemail Pauldron

Self design of many interconnected scales. It has quite a bit of flexibility, and you can mold it into shape with some heat if you want.

Printing Settings

• Filament Material: PLA
• Layer Resolution: 0.2 mm
• Infill Percentage: 15%
• Supports: No
• Brim: No
• Bed Temperature: 60°C
• Nozzle Temperature: 210°C

Printing Information

• Nozzle Size: 0.4mm
• Estimated Printing Time: Approximately 7 hours 12 minutes
• Print Volume: 188mm (width) x 154mm (depth) x 8mm (height)
• Printer Used: Prusa i3 MK3S
• Slicing Software Used: PrusaSlicer

Additional Information Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.