This is an innovative and functional 3D model of a full arm bracer, designed with practicality and durability in mind. The bracer is crafted as a single, seamless piece, emphasizing both aesthetic appeal and structural integrity
Printing Settings
Filament Material: PLA
Layer Resolution: 0.2 mm
Infill Percentage: 15%
Supports: No
Brim: No
Bed Temperature: 60°C
Nozzle Temperature: 210°C
Printing Information
Nozzle Size: 0.4mm
Estimated Printing Time: Approximately 15 hours 56 minutes
Print Volume: 245mm (width) x 192mm (depth) x 9mm (height)
Printer Used: Prusa i3 MK3S
Slicing Software Used: PrusaSlicer
Additional Information
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.
