Profile Image
propsmaker
propsmaker

propsmaker

Hello we are Propsmaker! We are an ever-growing library of 3D printing files.

And for those who want to have access to our exclusive platform: a greater experience and to pursue Commercial License of our STLs subscribe to PROPSMAKER, where you will have early access to our entire library of 3D models, access to our Discord community and our exclusive file sharing platform!

Follow

Select a membership plan

Model is included in this plan
Available now

Standard Access
$15.00
/ month

Designs Access: Active Subscribers will have access to up to 3 standard models per month added to this plan. This includes but is not limited to: Swords, Whips, Pauldrons, Chainmail, Scalemail, Boots, Shields, Bows, Maces, Rings, Amulets, Crowns.

Welcome Discount: You will receive a 30% discount valid for all my models, including those not listed in this plan.

Commercial License: With active subscription you have a commercial license to legally sell 3D prints created from the designs available on the catalog. Active subscribers are licensed to sell these prints on any platform of their choice.

The digital files are NOT for resale or distribution.

Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

By signing up to the this plan, you acknowledge and agree to all terms stated above. Any shop(s) or person(s) who break these terms of agreement will be held legally accountable.

Immediate access. Cancel anytime.

Model is included in this plan
Available now

Premium Access
$45.00
/ month

Enhanced Designs Access: As a Premium subscriber, you will receive all the benefits of the Standard plan with an upgraded access to 6 models per month, including exclusive premium models not available in the Standard plan. This includes the commercial license.

By subscribing to the Premium plan, you acknowledge and agree to all the terms stated above. Violation of these terms will result in legal accountability for any shop(s) or person(s) involved.

Immediate access. Cancel anytime.
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
propsmaker

Articulated Tassel Whip

by
propsmaker
Follow
Follow
Remix Model
Social
propsmaker
propsmaker
|
Image 1 of 3
Articulated Tassel Whip 3d model
propsmaker
propsmaker
|
Image 1 of 3
Articulated Tassel Whip 3d model
2D
3D
Makes
Articulated Tassel Whip 3d model
Articulated Tassel Whip 3d model
Articulated Tassel Whip 3d model

Every segment of the whip, including its elegant tassels, is interconnected, allowing for seamless printing without the need for assembly

Printing Settings

  • Filament Material: PLA
  • Layer Resolution: 0.2 mm
  • Infill Percentage: 15%
  • Supports: No
  • Brim: No
  • Bed Temperature: 60°C
  • Nozzle Temperature: 210°C

Printing Information

  • Nozzle Size: 0.4mm
  • Estimated Printing Time: Approximately 14 hours 39 minutes
  • Print Volume: 201mm (width) x 201mm (depth) x 190mm (height)
  • Printer Used: Prusa i3 MK3S
  • Slicing Software Used: PrusaSlicer

Additional Information Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.

Categories:

Costumes & Cosplay
Props
,
Articulated

Tags:

2 Likes4 DownloadsNovember 27, 2023
2 Likes4 DownloadsNovember 27, 2023
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy