Grrrol from New Super Mario Bros. U custom figure

WON 2.5 figure - Grrrol

won-2.5-grrrol-face.stl

WON 2.5 figure - Star bit

Jack O’Goomba from Mario Galaxy custom figure head

Print with caution, contains models with errors and relies on slicer auto-repairs
Refer to assembly.png for overall assembly.

WON 2.5 figure - Jack O’Goomba

Hop-chops from Super Mario 3D World custom figure

Print with caution, contains models with errors and relies on slicer auto-repairs
Refer to assembly.png for overall assembly.
I’d recommend you build out the frame first based on the top layout. You’ll only need to glue the peg caps to keep the frame joints together, everything else should be left loose. Refer to the A and B graphs to see what peg to use. The top and bottom pieces need to be glued to the spacers.

WON 2.5 figure - Hop-chops

won-2.5-hop-chops-head.stl

Trampoline from Super Mario 3D World custom figure

Print with caution, contains models with errors and relies on slicer auto-repairs
Refer to assembly.png for overall assembly.
I’d recommend you build out the frame first based on the top layout. You’ll only need to glue the peg caps to keep the frame joints together, everything else should be left loose. Refer to the A and B graphs to see what peg to use. The top and bottom pieces need to be glued to the spacers.

WON 2.5 figure - Trampoline

won-2.5-trampoline-top.stl

Urchin from New Super Mario Bros. Wii figure

Print with caution, contains models with errors and relies on slicer auto-repairs


WON 2.5 figure - Urchin

won-2.5-urchin-main.stl

Blooper Nanny/Baby from Super Mario Bros 3 custom figure bits

WON 2.5 figure - Blooper Baby

won-2.5-blooper-baby.stl

won-2.5-shine-sprite.stl

Toadsworth from Super Mario Sunshine custom figure bits

Print with caution, contains models with errors and relies on slicer auto-repairs
The toad body will need a bit of shaving to fit in properly. Note that the arms will need to be cut if printed in one piece.


WON 2.5 figure - Toadsworth 

won-2.5-toadworth-suit.stl

Dino-Torch from Super Mario World custom figure

Print with caution, contains models with errors and relies on slicer auto-repairs

WON 2.5 figure - Dino-Torch

won-2.5-dinotorch.stl

Boshi from Super Mario RPG custom figure bits 

Print with caution, contains models with errors and relies on slicer auto-repairs
Refer to assembly.png for overall assembly.
I recommend you boil and pop the head to fit the chocker, it should fit with no/minimal sanding.


WON 2.5 figure - Boshi bits

won-2.5-boshi-glasses.stl

Print with caution, contains models with errors and relies on slicer auto-repairs
Refer to assembly.png for print counts and overall assembly.
External peg rings are glued to hold the middle rings tight.
Middle rings are glue to the body.

WON 2.5 figure - Mallow

won-2.5-mallow-body.stl

Print with caution:
- Model is pre-hollowed with relative balance. Make sure to align tail hole for drainage.
- Contains models with errors and relies on slicer auto-repairs

Refer to assembly.png for print counts and overall assembly

WON 2.5 figure - Chargin' Chuck

won-2.5-chargin-chuck-body.stl

Print with caution:
- Arm cuts aren’t perfect and will likely need sanding/cleaning
- Contains models with errors and relies on slicer auto-repairs

Refer to assembly.png for print counts and overall assembly

pokus_pumpkin