Bolt this to the rear iron to stop the flywheel so you can turn that big pain in the @$$ nut. It bolts in two places so it wont turn on the bolt and lever the casting ear off the iron... Ask me how we discovered that.

I printed it in ABS, but it would probably work in any plastic. you want to print this with 6 or 8 perimeters on a 0.4mm nozzle. I used 4 perimeters on a 0.6mm nozzle. I used 40% grid infill as well. you want this to be hefty, the torque spec on that nut is like 350 foot pounds, so this thing is probably seeing around 600 pounds of force.

One of the legs has a cutout so that it will miss the alignment dowel its supposed to go around. This should fit turbo rx7 flywheels, as well as renesis flywheels.

Angry eyebrows go against the build plate. Why angry eyebrows? Because it looks like its chomping your flywheel :)



RX7 / RX8 Flywheel Stopper

rx7 flywheel stop.stl

one of the things that Zacks original divider bins were missing is just some plain jane bins. I've exported a few just from his blank storage templates.

gridfinity plain bins

1x1x6.3mf

2x4x6.3mf

2x5x3.3mf

2x5x6.3mf

1x3x3.3mf

1x3x6.3mf

1x4x3.3mf

1x4x6.3mf

1x5x3.3mf

1x5x6.3mf

2x4x3.3mf

3x4x3.3mf

3x4x6.3mf

3x4x2.3mf

1x2x12.3mf

2x2x12.3mf

1x1x12.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pmcquay

Achievements

Seedling

Fan Favorite

RX7 / RX8 Flywheel Stopper

gridfinity plain bins