Gangster Scratchy is loose—and he’s not messing around.

Clutching a broken bottle and oozing street-level menace, this version of Scratchy brings a raw, urban edge to your collection. From the saggy jeans to the cold stare, he’s ready for trouble.

Colors Used: -Bambu Basic: Red (Pants), Dark Grey, Light Grey, Mistletoe Green -Sunlu: Clear Green if you want a transparent bottle -Bambu Matte: Black, White, Sakura Pink -Geetech Silk: Gold -Hatchbox Matte: Cherry Red (Boxers)

Model Details: Scale: At 100% size, Scratchy stands approximately 9 inches (228 mm) tall. Scaling up should work fine, but if scaling down consider using a 0.2mm nozzle as some edges of the gloves may not print clean.

Scratchy Assembly Instructions Attach the L and R marked feet to the pants. Attach the belt to the red pants using the pins. Add the gold belt buckle—note the slight angled cut, which indicates the top of the buckle. Connect the upper pants, boxers, and black belly using the long pin. Insert the light grey belly spot before attaching the white shirt. Attach the tail to the back of the body. Assemble the gloves and fingers. Fingers are labeled L1/R1 (index, next to the thumb) through L3/R3 (pinky). Attach the hands to the arms using the pins. Connect the arms to the white shirt. Attach the head to the shirt, then add the light grey chest spot. Build and attach the eyes to the head. Attach the nose. Insert the tongue—you may need to adjust it slightly to find the correct fit. Attach the left and right teeth. Slide the broken bottle into the hand, with the flat edge resting against his palm. And just like that, Gangster Scratchy is ready for action.

Thanks for putting him together—now let him bring some serious edge to your collection. Don’t forget to share your print and tag @Playco3D