Made this to help loosen the water cap for my humidifier tank.  Even when putting the cap on snug, it always seems to tighten up.

0.2 Layer Height
4 Walls/Top/Bottom
20% Infill
Supports touching build plate only.

Humidifier Water Tank Cap Loosening Tool

Made this to help loosen the water cap for my humidifier tank.  Even when putting the cap on snug, it always seems to tighten up.

**Under Construction**

Setup for SKR 2 & RPI 4.
Mounts for Buck Converters, Dual Mosfet Module, and Dual Relay on the RPI Side.

[Diversitech MP4-E E.V.A. Anti-Vibration Pad ](https://www.amazon.com/gp/product/B00BVEMLR4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1) are cut into 4 squares and stacked using 2 pads to raise the printer up so the control box fits.  If you don't want to cut or use the pads, you can make your own feet to raise up the frame.

- Holes are not threaded.  
- (Optional) M3 & M4 Tap can be used to thread holes.
- M3 Button Head Machine Screws for Mainboard, RPI, Modules.
- M4 Button Head Machine Screws for Control Box.
- M5 Machine Screws for Left Front to attach to frame.  A M5 Tap should be used on the frame if holes are not already threaded.

Will be adding Front Panels for other Mainboards soon.

If you would like a Front Panel or Base setup for a certain Mainboard/RPI/Module.  Send me a message or leave a comment of what you would like.

Ender 3 - Control Box v2 - SKR/RPI

Ender 3 - Control Box v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4634422.

:: Update 2-27-2021 ::

Added variants for the 3D Touch (BLTouch Clone).
Changed the name of EX to A1.

Sorry I have been slow to update these.  If I missed anything just leave a reply and I will get to it when I can.

- - -

:: Update 1-8-2021 ::

Version 2.2 Released.

I have updated all the models to be about 0.8mm taller to hopefully remove the gap between the mount and the cover.

For the longer screw version, I have not printed a test one but I modified it a little to fix the layer issue.  Someone will have to print one and see.  I did not see a Issue in Cura as others have posted on the other version or this version.  Could of been a layer height settings.

I have modified the non-threaded version.  I made the hole smaller down to 2mm and removed the bottom so it is open.  This way if you want to use the stock screws that come with the BLTouch or you want to Tap your own threads you can.  If people like this version and would like a closed bottom version let me know and I will add one.  You will need to use supports for the this version.

Renamed the files so it is easier to find the one you are looking for.
The Numbers on the models will not be printed or show up in the Slicer.
1-4 is short threaded, 5-8 non-threaded, 9-12 long threaded

add a experimental one for 3D Touch (BLTouch Clone).  It is labeled EX.

If I have missed anything or if there is any Issues with these.  Please let me know so I can fix them.  I have printed #1 and it fit my BLTouch 3.1 perfectly with no gap at top and did not have to use any force to slide it on.

- - -

:: Update 10-26-2020 ::

Added some different variations. Unthreaded, No Mesh, and Long Threaded.

Short Threaded: 3mm D x 8mm L
Long Threaded: 3mm D x 10-12mm L

If there is a variation or adjustments that need to be added let me know.

- - -

BLtouch Cover (Remix) V2.1

In this version I added the ability to use the 3mm screws used on the BLtouch to also hold the cover on.  This way you don't have to fight with the small nuts or worry about it falling off. (If it wasn't tight enough already.)

I also adjusted it a little so it shouldn't fit as tight as the last version.  I did a few prints and it seems to fit a lot better, tho the prints were done on my LD-002R Resin printer.  I will try to get a print done on my Ender 3.  But if someone wants to print it with filament, please leave a comment on the fitting so I can make adjustments if needed.

BLTouch & 3DTouch Cover Protector V2.2 - (Remix)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4625318.

Update 1-13-2021

Added Magnet Mounted versions.  [Magnets](https://www.amazon.com/gp/product/B01M0XJD3O/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=scotty0a-20&creative=9325&linkCode=as2&creativeASIN=B01M0XJD3O&linkId=ca0b763cbdf619475d7ca62bda1aaeae)

- - -

I wanted to exhaust the Resin smell the best I could outside.  So I made this Mount for the back of the LD-002R that holds a fan.  I used 3" tubing to go from the printer to the window.  I attached a 120mm fan to the dryer exhaust (the 3 flap type) for extra air flow.  

The fan attached to the base that is mounted to the printer is wired to the same stock exhaust fan on the inside of the printer.  This way it will only turn on when you start printing. The 120mm fan on the dryer exhaust is hooked up to a custom made switch/power adapter.

I use a GPU fan from Zantec, but I made base/mounts for 70-80mm fans.  If you plan to use 4" tubing, I made a mount to go on the base for that size as well.

I mounted the base using the screw that was already on the bottom back part of the printer, and then drilled and tapped a hole for the top.  Make sure to remove the back part of the printer if you wish to do the same.  This can be done by removing the 1 screw at the back/bottom and the 2 on each side by the back of the printer.  The panel should slide back and out.

I will post pictures of what it looks like on the printer later.

LD-002R - Rear Fan Mount Vent / Ducting

LD-002R_-_Rear_Fan_Base_70mm.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4814241.

I don't like how slow the stock charger is (5hr per).  And it only charges.  To keep Lipo batteries in good shape they need to be put into a storage charge when not in use.

So I remixed this to my liking.

I made it longer to hold the battery better and put vents in the base.
Used different connecters to the battery as well from what I had.
Added 2 extra connecters on each side for the main wires.

Parts:
[Electrical Connectors](https://www.amazon.com/gp/product/B082WFGSGF/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1) - Base to Battery.
[Anderson Powerpole Connectors](https://www.amazon.com/gp/product/B01HDZ91G8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) - Main Wire Ends
[JST-XH Plugs](https://www.amazon.com/gp/product/B07ZK5F8HP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) - Balance Wire Ends
[20awg Wire](https://www.amazon.com/gp/product/B07TGJGJGD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) - Base to Balance Plug
[16awg Wire](https://www.amazon.com/gp/product/B01AAX65EG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) - Base to Main Connectors

For the Main Wire Connectors, you can use what ever connectors you want.  I think Banana Plugs are the common plugs used to plug into RC Chargers.

The JST-HX I got came as a set with some Duponts.  You should be able to pick up the JST-HX plugs in a kit on there own.

- - -

Remix of HS720 RC charging port by martii.



HS720 & HS720e Battery Charging Dock/Adapter (Remix)

https://www.thingiverse.com/pheelix14/designs

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pheelix

Achievements

Seedling

Explorer

Debutant

Humidifier Water Tank Cap Loosening Tool

Ender 3 - Control Box v2 - SKR/RPI

BLTouch & 3DTouch Cover Protector V2.2 - (Remix)

LD-002R - Rear Fan Mount Vent / Ducting

HS720 & HS720e Battery Charging Dock/Adapter (Remix)