A coffin-shaped case with a sliding shutter door!
Options
- Plain
- Crack
- Web
- Bat
Printing
- All parts can be printed without supports
- Shutter can be printed flat or vertical, but flat is recommended
Assembly
- If printing the bat case, glue in the bat insert before the rest of the assembly.
- Line up top and bottom cases at an angle with the bottom edge of each case touching.
- Press the bottom of both cases together so that they snap together. Do not press further.
- Slide in shutter from the front.
- Continue pressing cases together until they are fully locked together.
- See video above for a demonstration of the assembly.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Shutter Box - Coffin" (https://3dprinty.xyz/project/136) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).