HueForge Rose

I am playing around with colours! Have fun!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Pro Dark Purple Transmission Distance: 0.3 PLA PolyLite Pro Metallic Magenta Transmission Distance: 1 PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10 PLA PolyLite Pink Transmission Distance: 3

Swap Instructions: Start with Dark Purple At layer #7 (0.64mm) swap to Metallic Magenta At layer #10 (0.88mm) swap to Temp Purple-Pink-Translucent (Med) At layer #18 (1.52mm) swap to Pink for the rest.