HueForge - Galaxy's Edge

One of my favourite parts of "Rise" at Galaxy's Edge!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Starlight Neptune Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Steel Grey At layer #12 (1.04mm) swap to Starlight Neptune At layer #13 (1.12mm) swap to White for the rest.