3DPrintopia Bling Chain

9/21/24: Updated the openings on the chain link from 2.5mm to 3mm for easier assembly onto the pendent and other chain links. Also added the file for replacement links in case you break the links with the opening during assembly. Thanks to 3DMedicVince for the suggestion and individual link file!

Get ready for 3DPrintopia with some bling! The 3DPrintopia bling chain consists of a pendant and a chain link segment. Print multiple chain links and connect them for a long wearable chain necklace and show off your 3DPrintopia pride! NOTE: I do not own rights to 3DPrintopia logo. All logo rights belong to the event/organization and is used for entertainment purposes only. No remixes of the file or logo are allowed due to this.

I Recommend printing 3 chain links for desired length/look. Each chain link has each link on its ends with an open slot to connect easily to the pendent hooks and to additional chain links.

Print setting suggestions: Pendent can be printed with multiple colors (color swaps) on a single tool printer or and multi tool printer! Recommend slicing/painting alternating gems on the pendent to get the checkerboard look.

chain link has flat surface to adhere to bed. If having adhesion issues, I suggest a small brim around each link. light supports needed, especially on end links with open slot. 50% > infill recommended.