Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4870210.

HI-flow Extruder-Head For ANYCUBIC i3 MEGA or later fan-bracket for 5015 Blower fan


Original
"HI-flow Extruder-Head For ANYCUBIC i3 MEGA" by N3wSp3ak
https://www.thingiverse.com/thing:3519656


2021/6/15 UPDATE

In BRKT-PrintCooler5015_v1, the heater cable and duct were so close that the duct was deformed, so we increased the distance between the cable and duct.
We also improved the shape of the duct to be circular and the hole to be larger.

HI-flow Extruder-Head For ANYCUBIC i3 MEGA fan-bracket for 5015 Blower fan

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4924088.

<ENGLISH>
I really liked the idea of the original model (https://www.thingiverse.com/thing:3222461), but the screw shape was not compatible with the TR8 leadscrew used in Anycubic.
Using this model (https://www.thingiverse.com/thing:2246502) as a reference, I transplanted the TR8 screw shape and REMIXED it to rotate smoothly.

If the screw is too tight, adjust it by reducing the flow of the inner wall in the slicer settings.

Translated with www.DeepL.com/Translator (free version)


<Japanese>
オリジナルモデル（https://www.thingiverse.com/thing:3222461）のアイデアをとても気に入っていたのですが、ネジの形状がAnycubicで採用されているTR8のリードスクリューに対応していないため、
このモデル(https://www.thingiverse.com/thing:2246502)を参考にして、TR8ネジの形状を移植し、スムーズに回転するようにREMIXしました。

ネジがきつすぎる場合は、スライサーの設定で内壁のフローを減らして調整してください。


 Anycubic i3 Mega Anti Backlash Nut for TR8 screw

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4960336.

(in English)
This is a cable chain mount for the Anycubic MEGAX.

The shape of the MEGAX mount is based on this model.
https://www.thingiverse.com/thing:4738546

The Z axis (left side) of this model is easy to use and I like it, but the Z axis (right side) and X axis chains are not easy to use because you have to pass the cable through one part at a time.

This Ender3 chain has two parts and is easy to install, so I made a mount to fit the width of this chain so that it can be used with MEGAX.

https://www.thingiverse.com/thing:2920060
cableChain_link_v3.stl
cableChain_linkCover_v2.stl


I have moved the motor because I have a direct extruder, but I have taken into careful consideration so that it does not interfere with the extruder even if it is still in Bowden.


To fix the RightZ-top_base.stl, screw it to the carriage first.
After that, insert two M3 nuts from above and fix the RightZ-top.stl with M3 screws.

(in Japanese)
Anycubic MEGAX用のケーブルチェーンのマウントです。

MEGAXのマウントの形状はこのモデルを参考にしています。
https://www.thingiverse.com/thing:4738546

Z axis (left side)は上のモデルでも使いやすくていいのですが、Z axis (right side)とX axisのチェーンが１コマずつケーブルを通す構造で面倒だったので別のチェーンを探していました。
こっちのEnder3のチェーンは２パーツ構成でケーブルの取り付けが簡単なのでこっちのチェーンの幅に合わせて、MEGAXでも使用できるようにマウントを作りました。

https://www.thingiverse.com/thing:2920060
cableChain_link_v3.stl
cableChain_linkCover_v2.stl


私はダイレクトエクストルーダ―化しているのでモーターを移動していますが、ボーデンのままでもエクストルーダ―に干渉しないようにBaseパーツを作ったので大丈夫なはずです。（試してはいません）


RightZ-top_base.stlを先にキャリッジにネジ止めしてください。
そのあとM3ナットを2個上から差し込んで、RightZ-top.stlをM3ネジで固定してください。
ネジの長さはお任せします。


Awesome Ender 3 Cable Chain mount for MegaX

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4872133.

HI-flow Extruder-Head For ANYCUBIC i3 MEGA(S) rimix with BLToutch_mount 40 x 40 x 11mm heat-sink fan

BLTouch offset X40.00mm Y-57.00mm

The BLTouch is positioned so that it does not interfere even when the head is positioned at the right edge.

Original
"HI-flow Extruder-Head For ANYCUBIC i3 MEGA" by N3wSp3ak
https://www.thingiverse.com/thing:3519656

Remix
"HI-flow Extruder-Head For ANYCUBIC i3 MEGA 40 x 40 x 11mm heat-sink fan" by Toshi_Yamamoto
https://www.thingiverse.com/thing:4069711



UPDATE:2021/6/13
The BLTOUCH mount was fragile, so we rebuilt it with reinforcement.

HI-flow Extruder-Head For ANYCUBIC i3 MEGA(S) with BLToutch_rimix 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4904309.

Magnetic GoPro Mount

This GoPro mount is fixed with magnets.
It uses neodymium magnets with a diameter of 13mm and a thickness of 2.5MM or 16mm and a thickness of 2.3mm.
Two types are available: the type where the magnet is pushed into the back side and attached with double-sided tape or adhesive, and the type where the magnet is pushed into the slit and fixed.

The round indentations can be covered with rubber to prevent slippage.
Apply double-sided tape to the rubber sheet and punch out a round shape with a hole punch.

The slit type has less fixing power, but you can choose the one that best suits your application.
The one that uses two 13mm neodymium magnets stacked on top of each other has the strongest fixing power.
Although not recommended and not guaranteed, we were able to hold our iphone horizontally.

I used the data here to mount my iphone.
It's a great model and I'm very grateful for it.
Object Holders for LiftPod by HeyVye October 16, 2020
https://www.thingiverse.com/thing:4625349

The arm I make for the octoprint-camera is in preparation, but should work with many GoPro mount arms and camera mounts.


2021/07/13
Sorry.
The 16mm data I uploaded was wrong, so I replaced it.
GoPro_mount_16mm_hole.stl
GoPro_mount_16mm_slot.stl

Translated with www.DeepL.com/Translator (free version)

Magnetic gopro mount base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4908450.

This is a belt tensioner for the X-axis used with ANYCUBIC MEGAX.
It will probably work with the CHIRON as well.

This is the easiest belt tensioner to install in my opinion.
Simply attach the belt clips to the ends of the left and right belts and thread them through the unit.
Just put it over the carriage and tighten the screws.

You will need M3 nuts and M3 screws of the required length.

You may be able to use other models as long as the shape of the belt holder matches.
If you have tried it and found it works, please leave a comment.


update 2021/08/07
To increase the strength of the belt_clip, we increased the thickness of the back by 0.5mm. Also, the position of the nut was moved to the center.
belt_clip-L_v2.stl
belt_clip-R_v2.stl

To increase the strength of the belt_clip when printing, please print the belt_clip with 100% infill so that the clip faces vertically in the stacking direction.


update 2021/09/01
Fixed a bug where the BASE parts were not strong enough to spread out to the left and right.
In older versions, the slit was widened so that clip parts could be attached from the front, but the clearance caused the clip parts to spread and the base parts to spread.
The corrected new version has thicker walls and reduced the clearance to prevent the clips from spreading.

base-L_v2.stl
base-R_v2.stl
It is recommended to print with 100% infill to increase strength

Sorry, we have not yet solved the problem of not being able to press the X-end switch when using the stock carriage.

Anycubic MegaX x-axis belt tensioner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801116.

Trackpoint cap for Lenovo thinkpad keyboard.
There are two types, a bulging one and a dented one.



Trackpoint Cap  for Thinkpad Keyboard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4862485.

HI-flow Extruder-Head For ANYCUBIC MEGA-X rimix with BLToutch_mount 40 x 40 x 11mm heat-sink fan

BLTouch offset X40.00mm Y-57.00mm

The BLTouch is positioned so that it does not interfere even when the head is positioned at the right edge.


Original
"HI-flow Extruder-Head For ANYCUBIC i3 MEGA" by N3wSp3ak
https://www.thingiverse.com/thing:3519656


Remix
"HI-flow Extruder-Head For ANYCUBIC i3 MEGA 40 x 40 x 11mm heat-sink fan" by Toshi_Yamamoto 
https://www.thingiverse.com/thing:4069711



I used this as a reference for the remix for MEGA-X.

"MONOBLOCK ANYCUBIC I3 MEGA-S DirectTitan Cable for Mega X" by caesar02
https://www.thingiverse.com/thing:4529541


UPDATE:2021/6/13
The BLTOUCH mount was fragile, so we rebuilt it with reinforcement.


HI-flow Extruder-Head For ANYCUBIC MEGA-X with BLToutch_rimix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4806973.

This is penguin-shaped cookie cuttetrs.
There is a body and separate parts for the face and arms.
You can add movement to the arms by pushing them in different directions.

penguin-shaped cookie cuttetrs.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4930131.

(ENGLISH)
This is a mount and push pin for installing an optical switch on the Anycubic MEGA system.
The response position of the z-switch can be adjusted with the screw on the z-carriage just like the stock MEGA system.

The original model is here (https://www.thingiverse.com/thing:4660123).

In the original model, the y-axis adjustment range of the switch position is too small to make contact with the switch.
We have remixed the mount to allow the switch to be adjusted back and forth.
In addition, the push pin has been lengthened to increase the Z-axis adjustment range.

For mounting instructions, please refer to the instructions for the original model, but I made the following changes in my environment.

<Hardware>
I made a cable that splits one pin into two in order to branch to the left and right optical switches.
Point the branch cable to the 5V pin of the D42 to supply 5V to the left and right optical switches.

Since the switches are wired differently from the original microswitches, pull out the black and green wires from the 3-pin connector of the original wiring, add the 5V wires, and replace them.

Before change: S-G-none
After change: V-S-G

<Software>
Change the Marlin settings and build.

#if ENABLED(KNUTWURST_MEGA_X)
    // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
    #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
    #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
    #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. //true→false
    #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. //true→false
    #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#endif



(JAPANESE)
Anycubic MEGA系にオプティカルスイッチを導入するためのマウントとプッシュピンです。
純正のMEGA系と同様にzスイッチの反応位置をZキャリッジのねじで調整することが可能です。

オリジナルはこちら（https://www.thingiverse.com/thing:4660123）のモデルです。

オリジナルモデルではスイッチ位置のY軸調整幅が小さいため、スイッチに接触してしまうため、
スイッチを前後に調整できるマウントをREMIXしました。
また、プッシュピンもより長くしてZ軸の調整の幅を広げました。

取付方法はオリジナルモデルの説明が参考になりますが、私の環境での変更は下記を行いました。

<ハードウェア>
左右のオプティカルスイッチに分岐するために1ピンを2分岐するケーブルを作成しました。
D42の5Vピンに分岐ケーブルを指して左右のオプティカルスイッチの5Vを供給します。

スイッチの配線は元のマイクロスイッチと異なるため、元の配線の3ピンコネクタから黒と緑の線を引き抜き、5Vの線を追加して入れ替えます。

変更前：S-G-none
変更後：V-S-G

<ソフトウェア＞
Marlinの設定を変更してビルドします。

#if ENABLED(KNUTWURST_MEGA_X)
    // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
    #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
    #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
    #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. //true→false
    #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. //true→false
    #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#endif



optical switch on the Anycubic MEGA system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4816512.

This is a palm rest for Lenovo Trackpoint Keyboard (1st gen).
By moving the slider, you can adjust the angle of the keyboard.
The holes on the front and back of the keyboard hold it in place, so you can lift it up while it's attached.
The build surface is divided into left and right parts to make it possible to use a small 3D printer.

It is recommended to print the palm rest vertically to ensure a clean surface.


Body left x1
body right x1
Frame x2
Slider x2 Choose your favorite slider height from 15, 20, or 25
Peg_50 (Φ5.0) x7 Connects the body to the frame
Peg_55 (Φ5.5) x2 Connects the body to the keyboard

If the pegs are too tight or too loose, use the slicer to change the scale of the printout and adjust it.


Trackpoint Keyboard adjustable palmrest

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4806955.

Caps for 2X4 lumber and caps for 30mm *40mm lumber.


2x4 End Cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4876877.

I really liked the funnel that could be screwed into a plastic bottle, so I remixed a larger size.
The original M size was 52mm and the L size was 60mm, so I added 80mm and 98mm in diameter.
In addition, I added a hook.

<original>
https://www.thingiverse.com/thing:3174971

funnel_for_the_PET_bottle_remix(80mm,98mm)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801302.

This is a mount to put the speaker(TAOTRONICS TT-SK025) on top of the display(MSI Optix MAG341CQ).

Speaker mount  on Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4872056.

I made a 3 mm diameter pin to mount the 4010 fan on the duct.

https://www.thingiverse.com/thing:3796022

4010fan mounter  pin 3mm 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4909931.

This is a battery cover for the Logitech M575 trackball mouse.
I couldn't get warranty support for the lost cover, so I made a 3D model of it.
If you have lost your battery cover as well, this should help.


logicool trackball M575 battery cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801255.

This is the handguard(Tsuba) of Tanjiro's Katana.
It replaces the handguard of the toy sword.


Tanjiro's handguard for Toy sword

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

penholi

Achievements

Seedling

Debutant