It is a spacer ring to mount of a laser pointer in place of a telescope's finderscope. It is intended for the Bresser AR-152L, but it is very likely that it will fit other models and brands.

laser pointer spacer ring

laser_overlay.stl

0.4 nozzle
3 walls
3 top
6 bottom
**No supports needed !** (just pierce one layer to make holes for the screws)

SkyWatcher EQ5 Pro Dec. gears cover

eq5_cover_v2.stl

Introducing a holder for the SkyWatcher SynScan GoTo controller. I made it for the EQ5 Pro mount, but it can fit some other models as well. It can be used as a replacement for the original controller holder in case of damage or an alternative mounting option for those who prefer not to attach the controller to the tripod leg. 

SkyWatcher SynScan Controller Mount

sysncan_fork_hanger.stl

Introducing Ender-3 v2 Auxiliary Fan Duct designed to accommodate two 80x80 fans, such as Noctua NF-A8 FLX, to enhance part cooling. It mounts to X-axis aluminum profile using T-Nuts.


Supports required: **NO !**


**WARNING:**

To avoid potential cable collisions you need to modify the cable routing of the printer bed. Print a flat routing cable support arm or remove its cover if you want to keep the original one.

Ender-3 v2 Aux Fan Duct

top.stl

Introducing the Ender-3 V2 Printer Spool Holder Integration Kit – a description so creatively crafted that it might just break the mold (or at least put a grin on your face). We're talking about a nifty contraption here, folks. It's like a matchmaker for your Ender-3 V2 spool holder and your Ikea PAX cabinet, and it's all about keeping things classy – no extra holes needed!

Let's cut to the chase: you've got this Ikea PAX cabinet, right? It's the epitome of sophistication, and you've probably spent a good amount of time admiring it. Now, you've also got this Ender-3 v2 printer, the workhorse of your creative ambitions. And you're thinking, "Wouldn't it be grand if these two could get along?"

Enter our brainchild – the Ender-3 v2 Printer Spool Holder Integration Kit. We've taken the spool holder from your trusty 3D printer and turned it into a jet-setter, ready to cozy up to your PAX cabinet. Say goodbye to the days of debating whether to put extra holes in your prized cabinet or risking the delicate art of balancing filament spools on top. With this kit, you're the master of minimalism.

Now, let's talk assembly. Picture this: a single, unassuming screw steps in as the hero, joining the party to make sure everything's snug. And let's not forget the spacer – the unsung genius that ensures your filament spools spin like they're auditioning for a talent show. It's a duo that promises hassle-free printing and smooth rotations, all while preserving the sanctity of your Ikea PAX.

But wait, there's more! You might have noticed this description isn't your run-of-the-mill marketing mumbo jumbo. Nope, this little gem was concocted by none other than our ChatAI buddy. We're all about keeping things quirky and fun here, so take this as your cue to chuckle.

So, there you have it, folks – the Ender-3 V2 Printer Spool Holder Integration Kit. It's like a meet-cute for your printer and cabinet, brought to you with a side of AI-generated humor. Get ready to spice up your 3D printing setup and your day, all in one fell swoop!

IKEA PAX Ender-3 v2 Spool Holder Integration Kit

Introducing the Ender-3 V2 Printer Spool Holder Integration Kit – a description so creatively crafted that it might just break the mold (or at least put a grin on your face). We're talking about a nifty contraption here, folks. It's like a matchmaker for your Ender-3 V2 spool holder and your Ikea PAX cabinet, and it's all about keeping things classy – no extra holes needed!

Let's cut to the chase: you've got this Ikea PAX cabinet, right? It's the epitome of sophistication, and you've probably spent a good amount of time admiring it. Now, you've also got this Ender-3 V2 3D printer, the workhorse of your creative ambitions. And you're thinking, "Wouldn't it be grand if these two could get along?"

Enter our brainchild – the Ender-3 V2 Printer Spool Holder Integration Kit. We've taken the spool holder from your trusty 3D printer and turned it into a jet-setter, ready to cozy up to your PAX cabinet. Say goodbye to the days of debating whether to put extra holes in your prized cabinet or risking the delicate art of balancing filament spools on top. With this kit, you're the master of minimalism.

Now, let's talk assembly. Picture this: a single, unassuming screw steps in as the hero, joining the party to make sure everything's snug. And let's not forget the spacer – the unsung genius that ensures your filament spools spin like they're auditioning for a talent show. It's a duo that promises hassle-free printing and smooth rotations, all while preserving the sanctity of your Ikea PAX.

But wait, there's more! You might have noticed this description isn't your run-of-the-mill marketing mumbo jumbo. Nope, this little gem was concocted by none other than our ChatAI buddy. We're all about keeping things quirky and fun here, so take this as your cue to chuckle.

So, there you have it, folks – the Ender-3 V2 Printer Spool Holder Integration Kit. It's like a meet-cute for your printer and cabinet, brought to you with a side of AI-generated humor. Get ready to spice up your 3D printing setup and your day, all in one fell swoop!

IKEA PAX Ender spool holder

ÖVERSIDAN wardrobe light strip has a sensor that switches the light on and off automatically when you open or close the door. It also has a switch but it's a really tinny one and it's not comfortably placed for frequent use.

I keep my 3D printer in a PAX wardrobe with these light strips and I like to have the door open when I'm printing. I created this part to easily turn off the light for long prints.

Just slide it on or off the sensor.

The second part is a stopper that can be mounted with a double tape.

IKEA PAX ÖVERSIDAN light sensor cover

ÖVERSIDAN wardrobe light strip has a sensor that switches the light on and off automatically when you open or close the door. It also has a switch but it's a really tinny one and it's not comfortably placed for frequent use.

I keep my 3D printer in a PAX rack with these light strips and I like to have the door open when I'm printing. I created this part to easily turn off the light for long prints.

light_sensor_cover_stopper.stl

A wing foil for your first shallow water lessons.



Printing settings (UltiMaker Cura):
- 0.8 mm nozzle
- 15% Cubic infill
- Infill Line Directions: [0]
- 5 top layers
- Top/Bottom line directions: [45,0,135]
- Wall line count: 3
- Z seam alingment: sharpest corner
- No support needed

wingboard fin

A wing foil for your first shallow water lessons.

ender-3 v2 bed pull

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pawel7318

Achievements

Novice Maker

Seedling

Trailblazer

Debutant