Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651405.

This is a case design for a 7" touchscreen panel and a raspberry pi 3, it also incorporates a mounting system to interface with aluminium 2020 extrusion corner brackets.

(https://www.amazon.co.uk/gp/product/B07QKT6L58)


The design of the case and bracing system is all entirely my work. 
The articulated arms, bolts and nuts are inspired from the articulated lamp thing.
The 2020 extrusion mount is designed to plug into the 2020 corner mount things.

I had to rebuild both the 2020 extrusion corner (and extend the design) and the articulated arm to meet my requirements and allow me to easily edit them in sketchup.

Limitation:
This was designed to print on the Prusa Mini, the Top and Base pieces only *just* fit on the bed and will kick prusaslicer warnings when sliced.

The parts are designed to use as minimal supports as possible but do require support enforcers in some places (hinge, base, brace), I've included the 3mf files with supports.

I've found that printing with a brim helps keep the edges crisp - the Top and base halfs will require a brim of no more than 3mm to allow them to fit on the mini build plate.

I've included the parts as individual stls and whole platters to allow you to pick and choose how you want to print them. 

Raspberry Pi and 7" screen case - with mounting arm for 2020 extrusion

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4563614.

I shortened the barrel to allow the print to fit on a Prusa Mini bed capacity.

Dyson v6 drill dust collector - Prusa Mini compatible!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4650537.

This is a Damsen plum stoner for a drill press.

1. Snap fit the dish and tray together
2. put the corer into your drill press and ensure the drill press is OFF
3. place the tray over a saucer / glass / cup,
4. place the cup and tray dish under the press
5. place a damsen in the dish
6. using the drill press, push the corer through the damsen
7. retract the corer, the stone falls into the cup
8. remove the damsen from the corer
9. repeat
10. make awesome damsen jam / wine

the dish and tray can be washed and reused, however i would print a new corer bit for each season.



Damsen Stoner / Corer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4555089.

This is a not so much a remix, but additions to the "Helping Hands for PCB Soldering" and "Stronger Ball and Socket Links" to allow it to be surface used on my soldering pad.

Extras:
3 part track/rail system to create a desktop mounted base frame in modular build format
1 ball joint anchor to track slot

Remixed:
Alligator clip remixed to allow small 1mm wire to be fed through the clip and down through the ball jointed arm to the base - this will help resist part wear out and provide regitity to the whole structure.

Revisions:
version 002 of the anchor as i'd saved it upsidedown

Helping Hands Track rail and mounts (for PCB soldering)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

paulnoble

Achievements

Seedling

Debutant

Raspberry Pi and 7" screen case - with mounting arm for 2020 extrusion

Dyson v6 drill dust collector - Prusa Mini compatible!

Damsen Stoner / Corer

Helping Hands Track rail and mounts (for PCB soldering)