My take on the Internet from IT Crowd.  I added some detail to the sides.  Its designed to work with a fake security camera from dollar tree. 


The Internet from IT Crowd

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2845092.

Redesigned to work with magnets from Michael's (see attached)  and prints in 2 pieces. I also reworked the top to be slightly larger as my early prints the top came of easy. 

All editing was done in TinkerCad.

Sensei's Divining Top Magnetic

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3078775.

This is a PSU cover with 2 switch inserts. The cover is designed to be used with switches that can be purchased from Lowe's. The EIC plug should accomadate any you get from ebay/amazon. It has a solid bottom to keep your wires from getting pinched by the frame. I printed with supports for the cutouts but it should be printable without supports. 

The original design: Anet A8 PSU Cover (thing:2795849) by AlbEagle  it is based off of did not have a solid base and the switch holes were sized for smaller switches not easy sourced locally. 

A8 PSU Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3354002.

Inspired by Victory Points life counter (thing:1548577), I designed my version to use the American Penny as his used Euros. And I sized it to match a Magic the Gathering Card. Meaning you can have this be your divider in the your deck box and never have to worry about forgetting your life counter or toss a few spares in with your tokens. They fit snugly in most card sleeves meaning you can store it with the pennies and not worry about them falling out randomly. 

Edit- Revised version is slightly smaller making it fit easier into any spare sleeves you have to transport, and has indentions to help tell what number the coin is at. 

Just my 2 Cents Life Counter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3285681.

I used the stl from thing:1760652 to cut and crop the fan duct. The circular cut out on the insert means the rotary fan won't skim the duct and the cut back on the duct nose means it sits hgiher and blows wider for part cooling. 

Small Fan Duct

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3025005.

This design is designed to combine the functions of: Anet A8 Fan Holder
 by AleksBozovic (thing:2656950) and the Anet A8 Prusa I3 Extruder Lamp
 by Mafiatorte (thing:1883172).  I originally had the fan mod on my anet but wanted to add the light holder for easier view but there was no way to mount them together correctly. This design prints without supports. I printed at 10% infill and have had no problems with warping.


7-31-2018 Update - Added the sensor holder from: Anet A8 Fan & ROKO SN04-N Sensor Holder  by 10o  (thing:2779564)  new file is listed with sensor. 
 

Fan Light Mod - Anet A8

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3044456.

Modeled after: Anet A8 Spool Holder / Adapter (51/52 mm diameter) (thing:1888486) In fusion 360. I filleted the edges for a nicer look and the inside fillet means it can hold a filament spool with inside diameter from - 50-70mm


8-22-2018: Added a frame mount, modeled after: Anet A8 spool holder for 8mm screw (thing:1862701)  I added support between the frame and diagonal holder. I also refined the edges with some filleting.

Spool Holder / Adapter (51/52 mm diameter)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3040824.

Snap on cover to block the lcd light when having a print going overnight.

Modeled to work with Anet A6 LCD for Anet A8 (LCD12864)  thing:2923917

Since the housing is the same size as the stock frame this mod is compatible with stock lcd. The housing is 78mm wide and the stock display is 75mm wide so you have a slight tolerance on each side. 

I recommend printing on its side standing up, in this orientation no support is needed.

Anet A6 LCD for Anet A8 (LCD12864) Night Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3290804.

A boy and girl themed ornament to use for reveal baby gender to family and friends or show off on your christmas tree. 

Gender Reveal Ornaments

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2808728.

My First Design from Tinkercad. It's a rough clone of the Planar die from Planeschase Anthrologies.

Planar Die

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3323548.

This is a filament guide that is designed to mount on the left side of the frame. It slide on the crossbar and under the left frame ledge to be really secure. It works well with my Spool Holder that mounts on the right side. 

Anet A8 Filament Guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3383435.

My extruder lever broke at the fulcrum point. this is design to me a drop in replacement of the original injection molded piece. I have printed it as a flat piece laying down with supports at 100% infill in less than an hour. 

A10 and A10M Extruder Lever

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3385271.

Simple guides to keep your bowden tubes together. The holes are a bit loose so you can slide the bowden tubes in and out and the use a small zip tie to hold them in place with the power cable for the hotend. 

A10M Bowden Guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2814391.

Made the original one. The belt clip broke when my wife first put it on. So I redesigned it with a wider belt gap and reinforced the mount for the clip. 

Stethoscope Hip Clip V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3418358.

A simple dowel rod that you can 3d print in about 30 minutes per rod for the Washi Tape Dispenser by ermosher (thing:2813821). It has a 3m deep hole for piloting the screw to help assembly. 

Washi Dowel Rod

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3326985.

This is a modular Craft vinyl storage system. It can be mounted to any flat surface using the Wall Mounts that slot into any of the cutout  sides of the Hex. When assembling you can omit the center of the 6 in a ring form to have a wider holder if needed. 

I have tested the wall mount for compatibility on the Hexs but have not tested its mounting to the wall. The Holes are 5mm so most screws should work.

Hex Storage System

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2813629.

Wall mount Bracket for the older Square style Camera. Designed so the it sits on top and the last bend comes out to lock it in place.

This thing was made with Tinkercad. Edit it online 
https://www.tinkercad.com/things/9UhxVgB54Bi

PSVR Camera (SQUARE Model) Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2810870.

This is a simple  adapter plate for the common mounting holes on electronic devices to attach using either 3m tape or ZIP ties.



Mounting Hole Adapter Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3290809.

A simple light bracket for mounting a light up on the back of the lcd housing. I needed it to not be on the frame edge as I have a night cover for overnight prints that clamps on that edge. This also works to keep it out of sight if you only want a top light bar out of the way. 

Light Mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

patrick.david.hardwick

Achievements

Seedling