Modified Gridfinity Wowstick.obj
176 downloads · 4 years ago · This is a modification of Zack Freedman's Gridfinity magnum Sharpie holder.
This is a modification of Zack Freedman's Gridfinity magnum Sharpie holder.
Modified Gridfinity Wowstick.obj
176 downloads · 4 years ago in  andÂ
Gridfinity Modified Divider Glass Slide
Modified Gridfinity Bin with glass
#Gridfinity helping hand
Gridfinity Window Divider Bin
Gridfinity N Scale Train Display Box
Blank Insert Reinforced Lids
Gridfinity 1x3x6 Small Remote Holder
Reg Sharpie Holder 1x1x1 v1.stl
Remix of Screw Sorters, with mixed screw container below, NOT more Gridfinity compatible
Blank Insert Lids
Gridfinity Craftsman Pick Holder
GF Pliers Holder 2x4.stl
frame5x5.stl
Gridfinity Caliper Holder, iGaging
Gridfinity Caliper Holder for Neiko 01407A
Gridfinity iFixit Manta holder
Stackable Wall Mountable Gridfinity base 1x5 and 2x5
Gridfinity Deburring Tool, Scribe Pen & Blades Storage Tray - 1x5.stl
Model Train Gridfinity Display Frame Remix
I printed this but all of the holes were too small. Magnets, wowstick and the bits don't fit. Should I scale it up a few % points like @jukefr did?
had to scale to 10% in SuperSlicer for some reason should work nicely with 20$ aliexpress screwdrivers too the hole is 16.5mm from what i could tell from quickly measuring the stl
Hi, thanks for the model. Everything fits well and is easy to access. Definitely better to have magnets or screws on the bottom of this one since it's a little topheavy.
The .obj file uploaded doesn't seem to have unit data that any of my slicers understand correctly as millimeters. I was able to scale it correctly, but an STL may be useful for others.
Posted a photo. Thanks again. :)
Have you printed this yourself?
Yes mate. Any suggestions for improvements?