tracking pixel
Profile Image
orispoke
orispoke

orispoke

Hi, my name is Fero Toth. I'm a designer in the frontier of product and furniture design. I found joy in creating 3D printable designs for plants and lights and this is the result.

If you like what you see here, support me by following and let me know by liking which one do you like the most.

Let's use new tech in projects with a positive impact.

Follow

Select a membership plan

30% off
Personal
$8.39
/ month
when billed annually

Get 4 models/month Save 30% when you choose an Annual Plan Files are for personal use only

Creator
$15.99
/ month
when billed annually

Get 8 models/month Save 30% when you choose an Annual Plan Files are for personal use only

30% off
Commercial
$35.00
/ month
when billed annually

Commercial License to sell physical 3D prints Unlimited downloads from the entire library of Orispoke designs Save 30% when you choose an Annual Plan

Orispoke

Trinity planter Old Design

by
orispoke
Follow
Follow
Remix Model
orispoke
orispoke
|
Image 1 of 10
Trinity planter Old Design 3d model
orispoke
orispoke
|
Image 1 of 10
Trinity planter Old Design 3d model
2D
3D
Makes
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model
Trinity planter Old Design 3d model

An original planter that is:

  • modular: endless combinations for assembly
  • self-watering:
  • air-pruning design: better growth of the roots.

Trinity planters can be built in the towers, in the double towers, or in groups of planters. It is designed to stand or to hang with features of self-watering and air pruning. It has multiple inner pots for the optional distribution of plants.

It is designed especially for FDM 3D printing with printable angles, and corners. The main planter needs to be watertight with resin coating but it depends on the printed material, thickness, and perimeters of the wall.

Printed in PETG

  • For the same perforated look of the legs use only infill (triangles) with 50% The main pot and inner pots are printed at 0,3 layer height for time savings. Probably you need to use epoxy coating from the inside. Test it before use.
  • For the watertight surface of the main POT without epoxy use at least 6 perimeters for the walls and lower layer height to 0,15 (thickness is 2mm) Test it before use.
  • Other parts are printed at 0,2 layer hight

8 Likes12 DownloadsMay 14, 2024


8 Likes12 DownloadsMay 14, 2024