This is a Star I designed to hang on the wall.

Per print is is nearly 50x50x8mm
nearly 3.5 grams each when printed as
5% infill / Gyroid / 1.2mm top layers

There is a notch in the back for upto a 2mm nail to hang from

Small Wall Star

Small Star.stl

This is a Star I designed to hang on the wall.

I printed this with Glow GiantArm Multicolor Glow

Per print is is nearly 150x150x15mm
nearly 40 grams each when printed as
5% infill / Gyroid / 1.2mm top layers

There is a notch in the back for upto a 2mm nail to hang from

Wall Star

Star.stl

This is a marker stand that I created.

it is designed to hold 15, upto 12mm in diameter colored pencil or marker.

each layer is printed separately to reduce the need to supports.

the design size is
Top |  205 mm x 100 mm x 12mm tall
Add | 205 mm x 100 mm x 20mm tall - Note 3mm is pushed into upper layer
Legs x2 | 100 mm X 10mm x 28mm tall Each -

Every Shelf has 4 5.5mm holes in the bottom to allow for more layers added below.
The posts on the Add shelf is 5mm allowing for easy fitment and can be glued there.

each shelf is roughly 65 grams with the settings
x2 legs is 9.1grams
PLA | Layer Height 0.2 | infill 10% grids | each print was roughly 6 hours on my ender 3 
I added a 4mm support in the middle of the 4 holes to allow them clean bridging 
during my printing.  please let me know how yours turns out.

I am unsure how to add the license,
you are welcome to share, use, sell, or whatever my design.

Update notes 3/19/2024 added Legs to allow you to raise the bottom shelf off the table

marker shelf v2 + legs

marker shelf top v2.stl

marker shelf add v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

notsodirt

Small Wall Star

Wall Star

marker shelf v2 + legs