This is a marker stand that I created.
it is designed to hold 15, upto 12mm in diameter colored pencil or marker.
each layer is printed separately to reduce the need to supports.
the design size is Top | 205 mm x 100 mm x 12mm tall Add | 205 mm x 100 mm x 20mm tall - Note 3mm is pushed into upper layer Legs x2 | 100 mm X 10mm x 28mm tall Each -
Every Shelf has 4 5.5mm holes in the bottom to allow for more layers added below. The posts on the Add shelf is 5mm allowing for easy fitment and can be glued there.
each shelf is roughly 65 grams with the settings x2 legs is 9.1grams PLA | Layer Height 0.2 | infill 10% grids | each print was roughly 6 hours on my ender 3 I added a 4mm support in the middle of the 4 holes to allow them clean bridging during my printing. please let me know how yours turns out.
I am unsure how to add the license, you are welcome to share, use, sell, or whatever my design.
Update notes 3/19/2024 added Legs to allow you to raise the bottom shelf off the table