Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4945519.

i have a centralized vacuum dust cleaner from a known canadian brand, the vacuum cleaner is ok, but the plugs wear down real fast, so i designed my own, to cut down replacement cost....

since i only use the "construction" variant (without shiled to hide the plug) i desinged only those, but its done in openscad, so you can add your own!

[EDIT] i got an unused flexible with broken handle lying around, and needed an adapter to add my workshop machines temporarily to the vacuum-circuit (they have their own cyclonic separator) so i build an adapter from straight 5cm pipe to wall plug using the original, threaded, tube, enjoy! 
In the scad you have also only the nut for the tube, before printing all, please, and really recommended,  print out an at least 25mm (to catch at least 3 spires) test- nut to check with your tube!

if there's interest i can open up a git, would be nice to have some cooperative work (instead of some remixes... that are hard to follow and mantain....)

so have fun!

centralized vacuumer wall plug

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3769527.





Spool Holder for 10mm thread and 1000ZZ Bearings in openSCAD

i found this beautiful spoolholder https://www.thingiverse.com/thing:2070272 but since my available material
are 1000ZZ bearings and 10mm rods, and also purely, for learning purposes, i am trying to reproduce it in 
openSCAD

i did it to be printed on a 3Dmodular Sclar XL premium, but failed miserably, had to let it print on a CR20 from a friend.... there it went without  a glitch


YAFS yet another spoolholder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4347650.

an adapter and a filter  to screw on a 1/2" pipe thread on one side and clip into a 10mm Gardena microdrip tube on the other.

I have a small solar pump that fetches water from a buried tank, and i wanted to use the microdrip tubing. The outlet of the pump is 1/2" male thread, couldn't find anything suitable, so i drawed it.

If ever you want the openscad source, drop me a note, and i will put it up on github, to compile it,  you will need https://github.com/adrianschlatter/threadlib 
and https://github.com/nohkumado/scalar-rackmods

[EDIT] added the new scad files, cradle in the preparation...

pump kit, 1/2" to gardena microdrip 10mm connector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3799509.

Since the proposed mount options for the titan extruder on a Scalar
XLP didn't work for me, i designed my own.

This mount has the advantage, that you can easily remove the whole
extruder easily to perform, e.g. calibration

And you keep easy access to the pressure knob and the filament release
or advancing wheel.

[Edit] added a Version to attach my cable chain to it (https://www.thingiverse.com/thing:4251759)

scalar xlp titan extruder holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4233677.

inspired by https://www.materialise.com/en/hands-free-door-opener,
(Edit: found it just now on https://cults3d.com/en/3d-model/tool/printed-door-opener-to-help-against-the-spread-of-coronavirus), so all credit for the idea goes to them!

unfortunately their thing wasn't adaptable to my doors, couldn't open the source since i use openscad......

the source of this is in https://github.com/nohkumado/covid19_doorhandle
feel free to modify it!

rationale: places where people get in and out frequently, everyone touches the
doorhandle, even with appropriated metallic coating of certain sorts (copper,
silver etc) the handle is able to desinfect itself in a minimum time of 10 min,
if passage is more often, lets try to not let the handle be touched then.

Here comes this design, instead of using the hand, the forearm is used to make
lever on the handle and to pull the door closed (if you need to push, you can

Edit: i found a box of M6 screws with hex head and some winged nuts, added those stls one for straight knob, one for rounded knob (you can easily change the screw type on knob specs in the openscad source, be careful to take the git version!



parametric covid19 hand free doorhandle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5236583.

# alternative bell button for the plexo from Legrand

Read the original of this  [file](https://github.com/nohkumado/openscad-legrand.git) @·
[https://github.com/nohkumado/openscad-legrand.git](https://github.com/nohkumado/openscad-legrand.git)

Tired of the bell button to brake down?·
well print it yourself, and make it more original in the process·
(still hoping the children will come up with more interesting designs,·
feel free to participate into the challenge of the most exotic bell button! )


Be careful, you will need to add a sheet of something flexible and durable (i took a square of·
EPDM membrane to keep the thing watertight!

You will also need my [nohscadlib](https://github.com/nohkumado/nohscadlib.git) to compile it yourself


and here's what my actual doorbell looks like:
![Doorbell photo](img/proto1\_klingelknopf.jpg)

its a prototype, i printed it with a cleareance of .4mm, which was too much...·
if you want the hinge model yourself, drop me a message for the hinge itself

have fun


Legrand Plexo bell button

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4945472.

Blowpipe darts
i have an old blowpipe that i now let the children use, guess what? the darts "disappeared" in a very short while....

here we have some replacements!

[EDIT] following the presentation @TuxTage21  i cleaned up the code and added some twist to the dart-fins
[EDIT] translated the variables for the customizer into english, left only one dart to be customized, but i am sorry, the thingieverse customizer doesn't want to render it... since i don't know why... you will still have to download it and launch the regular openscad customizer or edit the code directly...
[EDIT] added a phhoto with the new twisted fins, not sure it does a better job, but well at 10m the dart is solidly and in a straight manner in the target!

blowpipe (or blow pipe? blow-pipe?) dart

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4946062.

Another design of my daughter Manuela, some figurines for a tabletop RPG game, you can add a flag on a toothpick in the back of the figurines if needed!

she could need some help adapting this to the customizer...

NPC for tabletop RPG

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4230070.

The original case for the ramps sits on top of the scalar printer, since i have some issues with the wiring, i prefer to have everything down and with short cables, thus remodeling the case, since the controler has som long wires, putting it on the front makes it more accessible for me.
source on github https://github.com/nohkumado/scalar-rackmods/tree/master/controler_gehaeuse

3030 Ramps controlerboard case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4640651.

a design of my daughter Manuela, supposedly underage to publish on thingieverse (and to design??)

an enclosure for the robobox no 1 kit

-----


boitier rond pour le montage de la robobox no 1, la led, rentre tout juste et se coince tout seule, pour le buzzer faut quelques points de colle chaude, vautmieux encoller aussi un peu l'arduino, sinon, avec le cable d'alim pas trop souple, ca le balade..... 

Robobox 1 boitier rond

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5208407.

#Vertuo caspule pack holder

This is a capsule holder for the packages of the vertuo caspule type, since their package size change depending on the type, only colombia and diavolito are supported atm, feel free to add your favourite ones (function nespresso_formats, don't forget to upstream your changes!) :

https://github.com/nohkumado/openscad-nespresso

actual version is the rightmost i the photo, but since the previous revisions also work, i kept them...



Nespresso Vertuo Capsule box holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4251914.

Customized version of https://www.thingiverse.com/thing:2187167

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167



hinege

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5194726.

There are allready tons of mask tensioners out there, but none are really customizable, and i had to do one for a child.

This one is done with openscad, you will need also https://github.com/nohkumado/nohscadlib  if you want to use then yourselves, or i have to find somewhere the time/energy to make a working package...

but basically you can change in the customizer the length of the strap its thickness width, the number of chevrons and you can imprint a name on it

COVID mask strap tensioner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4242195.

In time of qurantine, closed hardwareshops and the unability to move outside, some stuff gets to be unavailable....
i still want to appends stuff to my printer, and at least for non mechanical vital stuff, like the controler boards case etc, plastic screws will have to do until the  quarantine is lifted....

if you want the openscad code, drop me a note, since the file is part of my overall 3dmodular scalar xlp mods
On github https://github.com/nohkumado/scalar-rackmods/tree/master/masken

[Edit] added roudn edges instead of just cutting at 45deg, makes the nut turn easier

3030 hammer nuts and bolts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3788559.

A Support for the v3 bip&go highway badge


BipAndGoSupport for TRP 4010

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4251751.

I wanted a wallmount on which to clip the camera with that fast clip, didn't find one, so heres my first try, if someone is interested i can put hte openscad file into github, drop me a message

GoPro8 Wallmount (parametric)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4251759.

i wanted to make a chainlink cable holder for my scalar printer, i tryed https://www.thingiverse.com/thing:1078216 but it didn't print well, and i didn't get through the code, so i made my own....
this prints nice and smooth

Openscad source on https://github.com/nohkumado/scalar-rackmods/tree/master/chain_link

Another parametric chainlink (for scalar xlp)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4225652.

I tried a lot of solutions to insulate my printer from external vibrations, this one seems to do its job, its a mix of high pressure interface to block vibrations and elastic dampening of vibrations

i used 3 foots for my printer, 1 behind 2 in the front

Source on github https://github.com/nohkumado/scalar-rackmods/tree/master/controler_gehaeuse

Parametric 3030 Al profile bouncing ball foot for 3D modular Scalar printer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4945472.

Blowpipe darts
i have an old blowpipe that i now let the children use, guess what? the darts "disappeared" in a very short while....

here we have some replacements!

blowpipe dart

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like