Shifter plate

If you are like me you bought the 7 speed plus reverse plate for your alixpress shifter, thinking that was the best option, only to find that there are basically no 7 speed manual cars in games , this is the plate i should have got , works good, used the dimensions off my shifter to build 

leg support

Leg support for mpcnc, made this for my mpcnc, to support the legs horizontaly, my leg diameters are 25.4mm and height is 100mm 

spacer.stl

20x10x5mm spacer, with 4mm hole in middle. Im using to mount switching power supply off surface, pretty basic model made in blender, might be useful for someone

ferrari hub 5mm.stl

ferrari hub2.stl

zero delay base.stl

Box for a zero delay controller, has hole in top of lid for button wires, hole in end for usb out, base has screw holes for mounting zero delay unit and screw holes for mounting to a surface, unit does not have clip to hold to each other, but is a nice tight fit, and usb will hold in place

zero delay lid.stl

- Box for a zero delay controller, has hole in top of lid for button wires, hole in end for usb out, base has screw holes for mounting zero delay unit and screw holes for mounting to a surface, unit does not have clip to hold to each other, but is a nice tight fit, and usb will hold in place

End cap for 25.4mm tube

End cap for 25.4mm tube with 1.2mm walls.
Designed in blender, fits the tube i have brought for the MPCNC Primo J i am making, fits tube well once i deburred ends of tube 
I may design another with hole for wiring to poke through once i start putting MPCNC together

Dimensions
End cap - 25.4mm
Inner tube - 23mm
Length - 17.25mm


nippy

Achievements

Seedling