As the weather gets cooler Yuri the Yeti finds his way out of his cave to wander the forests in search of...hot wings. Believe it or not, they're his favourite food and extremely hard to get when you're stuck in a cave most of the year. He'd love to order them on Uber Eats but it's hard to get a signal in the mountains and sat phones are expensive.

Tested from 60-100% with no issues or supports required. I highly recommend a brim for 80% and less. Smaller prints might be weaker, and prints larger than 100% would likely require supports due to overhangs. The largest Yuri is printed at 250% scale!

Available in 3mf and STL for multicolour or single colour printers.

Yuri the Yeti 

Yuri the Yeti STL.stl

Meet Beauregard the Bat! Originally from an attic in a musician's house in New Orleans, Beauregard has finally left the French Quarter to venture out on his own. Would you believe he plays the trumpet? It is a bit tricky with his fangs, but he's spent years mastering his craft and studying under the very talented musician he lives with. Out on his own, Beauregard is looking for friendship, a nice conversation over a Pimm's Cup, and maybe some fun nights out dancing.

Tested from 100 - 50% with no issues. Supports are required for his snout and fangs. If your printer is decently tuned, the wings and ears shouldn't require supports.

Available in 3mf and STL for multicolour or single colour printers.



Beauregard the Bat

Beauregard the Bat STL.stl

Meet Kip the Knight! He's brave, strong, and not so great with a sword. Honestly, he was supposed to be a King's guard until they tested his fighting skills. They felt it was best he was in charge of shining the shields instead of being on the front lines. Unfortunately, Kip created mirrored shields which worked well for blinding the enemy, except it also started brush fires in the camps. Kip has had a bit of a difficult time fitting in, he's always been...different.

Tested from 100 - 60% with no issues or supports required. I highly recommend a brim for 80% and less. Smaller prints might be weaker, and prints larger than 100% would likely require supports due to overhangs.

Available in 3mf and STL for multicolour or single colour printers.

Kip the Knight

Kip the Knight STL.stl

Meet the ultimate cauldron for spells, potions, or like...candy. Or shrink it down to 55% in a white or translucent filament and enjoy a beautiful tealight holder.

Large model in pictures is printed at 100%. Tealight model starts at 55%. Minimal supports required for lower skulls.

Available in 3mf and STL for multicolour or single colour printers.

Skull Cauldron 

Skull Cauldron STL.stl

Rusty started on a production line back in July of 1986 and, due to some poor investments in the stock market and inflation, the factory was abruptly shut down mid August. Rusty, and all his friends, lay abandoned on the conveyor belts, completely assembled but Rusty was the last lucky robot to be programmed before the technician was forced to leave. 

His luck ended there, however, as they were all locked inside the factory until just recently. Technically they function, they need programming, but most of all, they need a lot of love to overcome their abandonment issues.

Tested from 100 - 60% with no issues or supports required. I highly recommend a brim for 80% and less. Smaller prints might be weaker, and prints larger than 100% would likely require supports due to overhangs.

Available in 3mf and STL for multicolour or single colour printers.

Rusty the Robot

Rusty Robot STL.stl

Enjoy death, but adorable! Print the Grim Reaper with it's 3 skull victims (angry, happy, and sad). Death's never been so cute.

Model in pictures printed at 150% on Bambu X1C with 0.4mm nozzle and hand painted.

Available in 3mf and STL for multicolour or single colour printers.

Grim reaper - 3 Skulls

Grim reaper - 3 Skulls 3MF.3mf

Marty is not quite sure how he ended up a mummy. One day he was inspecting the structure of the pyramids and the next thing he knows, he's waking up all wrapped up in a tomb.

The sad thing is; it was Marty's first day as Pyramid inspector. He was a young graduate and missed his party years. Now he's back and ready to dance.

Tested from 100 - 60% with no issues or supports required. Smaller prints might be weaker, and larger prints would likely require supports due to overhangs.

Available in 3mf and STL for multicolour or single colour printers.

Marty Mummy Flexi 

Marty Mummy Flexi STL.stl

Halloween, horror, and cuteness collide with Cheeto, the pumpkin killer!

Model in pictures printed at 100% on Bambu X1C with 0.4mm nozzle and hand painted.

Available in 3mf and STL for multicolour or single colour printers.

Cheeto Pumpkin Killer

Cheeto Pumpkin Killer STL.stl

First of all, thank you for considering joining my Thangs membership. By subscribing to my Thangs plan, you gain access to the current month's model and all previous models released. Minion members **do not ** have the ability to sell the physical prints of all models. This tier is strictly for personal use. If you would like to be able to sell my designs, please check out the "Nerd" membership. At no time do you ever have the right to sell or share the digital file of the model.

Modifications of files are not allowed unless first verified by me.

NerDIY Minions

First of all, thank you for considering joining my Thangs membership. By subscribing to my Thangs plan, you gain access to the current month's model and all previous models released. Nerd members have the ability to sell the physical prints of all models as long as they are paying members. At no time do you ever have the right to sell or share the digital file of the model.

Modifications of files are not allowed unless first verified by me.

NerDIY Nerds

Rusty Robot 3MF.3mf

Kip the Knight 3MF.3mf

Beauregard the Bat 3MF.3mf

Yuri the Yeti 3MF.3mf

Just a DIY nerd trying to make it in the galaxy with her 3D printing wits about her. 

My name is Julie, I am the owner of NerDIY Studios, fueled by caffeine, a wife, a mom of 2 kids, and working on making this business a full time venture. I started 3D printing and designing cookie cutters and cake toppers in 2020. As I've grown and learned more, I have ventured into more organic modeling.

Everyday I learn and grow in what I am capable of designing and I look forward to putting out monthly models; themed and otherwise. Some will be sculpts and some will be articulated/flexi-pieces.

Join my Nerds membership plan for the ability to sell my models commercially or join the Minions membership plan for personal use!

Thanks for stopping by :)



Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nerdiystudios

Achievements

Seedling

Trailblazer

Pinned models

Rusty the Robot

Kip the Knight

Beauregard the Bat

Yuri the Yeti

Yuri the Yeti

Beauregard the Bat

Kip the Knight

Skull Cauldron

Rusty the Robot

Grim reaper - 3 Skulls

Marty Mummy Flexi

Cheeto Pumpkin Killer