Project box to hold the components from my RC controller USB flight sim adapter ([GitHub Project](https://github.com/neilbalch/CPPM-HID-Adapter)). The components are an Arduino Pro Micro, DIP socket, and FlySky FS-iA6B receiver

RC Adapter Case

RC Adapter Case v7.step

Custom cable chain I made as an experiment. The Fusion 360 model is parametric in most specifications and dimensions.

Cable Chain Links

Base.stl

Yi Action Cam mount for RC Quadcopters. Holes intended for rubber grommets (like these: amazon.com/gp/product/B01NCQFPXQ).

Camera angles available:
- 20 degrees
- 30 degrees
- 45 degrees

More angles can be made upon request.

Holes line up with those for the camera plate on the LHI H280 250mm frame (amazon.com/gp/product/B010FIIQL6/), with a rectangular 37x39mm pattern.


Yi Action Cam quadcopter mount

Yi Action Cam mount for RC Quadcopters. Holes intended for rubber grommets (like these: amazon.com/gp/product/B01NCQFPXQ).

Camera angles available:
- 20 degrees
- 30 degrees
- 45 degrees

More angles can be made upon request.

Holes line up with those for the camera plate on the LHI H280 250mm frame (amazon.com/gp/product/B010FIIQL6/), with a rectangular 37x39mm pattern.

Cam Mount (30 degrees) v10.step

Helping Hands base plate that I designed after not being able to fit mine into [the other one I found on Thingiverse](https://www.thingiverse.com/thing:3347987).

Inner dimensions are provided in a picture, all inside corners are fillited with a 2.5mm radius. The F3D Project file is also included, so have fun!

Helping Hands Base

Desk Pad v2.step

Replacement knob for my parents' kitchen range fan control selector

Kitchen Range Hood Knob

30-degree quadcopter Eachine FPV camera mount. (designed for [this camera](https://www.banggood.com/Eachine-1000TVL-13-CCD-110-Degree-2_8mm-Lens-Mini-FPV-Camera-NTSC-PAL-Switchable-p-1053340.html?cur_warehouse=USA))

Can be secured in place with zip ties (what I did) or with double-sided tape. (or both!) The camera is secured to the mount with a zip tie, but the mounting between the mount and the frame is completely up to you.


Eachine FPV Camera Quadcopter Mount (30 degrees)

Remixed (redesigned) arm for the "250 Quad" design (https://www.thingiverse.com/thing:855416) which is thicker and more robust.


Strengthened 250 Quad Arm

Designed in Fusion 360 to replace some of the drawers in an old Akro-Mills part cabinet I have.

Akro-Mills Container

Akro-Mills Container v4.step

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like