Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4725016.

35mm spacer to allow for a 240 or 280mm radiator up to 30mm deep, larger PSU etc, to suit a Cooler Master NR200 case.

Makes use of the existing lid
Relocates front I/O (USB ports, power & reset buttons, 3.5mm jack)
Can be fixed to the case via zip ties

Work in progress.

Version 1 can be found at: https://www.thingiverse.com/thing:4707763

280mm is UNTESTED - let us know, should fit up to 30mm deep.
You will probably need longer fan screws for the 280mm - finicky as you'll need to screw the fans in from within the case - try the fan tabs I've included that will allow you to mount the fans from above.

Undecided on the cover mounts, they're strong enough but you may need to file them to fit - feedback appreciated.

Download all 'common' parts. Then download either the 240mm or 280mm parts depending on what radiator/fans you are using.

When installing covers, note the right side up is the edge where the mounts are NOT flush - this allows clearance for the lid clips.

<b>Updates:</b>

17/01/2021: Added 'fan tabs' for fitting the 140mm fans - hang the fans from the top of the chassis via these tabs. This assumes you have sufficient space between the radiator and the top of the case to fit them, deep radiators (30mm) may not have space. Designed to work with standard fan screws.

23/01/2021: Replaced nr200_tophat_spacer_v2_frame_240mm_fl.stl and nr200_tophat_spacer_v2_frame_240mm_fr.stl files - one was a duplicate of the other, sorry :(

18/02/2021: Finally got access to Thingiverse back... feedback so far suggests the installation of the 280mm radiator/fans interferes with the rear power connector (it bumps against the fan). Since there's no way to move the radiator further forward I'll look at ways to space the power socket out from the case. Not optimal but it is what it is.

Otherwise I'm tidying up the designs, including chamfers etc

19/06/2021: Fixed up nr200_tophat_spacer_v2_frame_280mm_rl.stl

Cooler Master NR200 Case Top Hat Spacer V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4707763.

35mm spacer to allow for a radiator, larger PSU etc, to suit a Cooler Master NR200 case.

Version 2 now available, includes 280mm radiator option: https://www.thingiverse.com/thing:4725016

Makes use of the existing lid
Relocates front I/O (USB ports, power & reset buttons, 3.5mm jack)
Can be fixed to the case via zip ties

Work in progress.

Will be adding variants such as 140mm fan mounts, direct radiator mounts (so you don't need to remove mesh from lid etc) and anything else I can think of or anyone suggests.

<b>Updates</b>

04/01/2021: Added design with mount points for a 240mm radiator. Clearances 'should' be okay. I/O mount and cover are compatible.

06/01/2021: Corrected errors with the 240mm files.

17/02/2021: Added additional clearance between the radiator mounts and lid (2mm) on the 240mm files.

Cooler Master NR200 Case Top Hat Spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4778339.

Simple spacer to move a PC's power connector outside the chassis. 

My reason for making this is that the backside of the power connector was interfering with fan placement within the case (a Cooler Master NR200 case, fitting 140mm exhaust fans).

5, 10, 15, 20, 25mm spacer files provided.

Most PCs use 6-32 UNC style screws, allow 5mm for the socket plus 5mm for case. So to fit a 20mm spacer you will need 30mm long screws.

IEC C13 Socket Panel Mount Spacers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4736952.

A very simple stand to support a GPU when mounted vertically in the CoolerMaster NR200 case.

Screws onto the PCIE riser card/cable using a M3 nut/bolt.

The 'feet' of the stand are positioned to sit in the bottom case rails and provides 55mm clearance for fans/radiators.

As GPUs can blow rather hot air it is recommended to use materials that won't soften under moderate heat.

Use the measurements to make something better.

Cooler Master NR200 Vertical GPU Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4820967.

Snapped one of the 3 blades of my 40cm wall fan while cleaning it. So I remixed an existing blade/prop done by crazytiti to suit - a slightly different mount and 40cm instead of 30cm.

40cm Pedestal/Wall/Desk Fan Blade/Prop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4703652.

Fan duct to suit a Cooler Master NR200 case. Assists with expelling hot air from the GPU via the top front 120mm fan. Useful for GPUs that exhaust air through the backplate eg Nvidia RTX 3000 series, AMD RX 6000 series.

Uses the HDD mounts on the PSU cage. Cage must be mounted in the 'low' position. Although the designs can be adapted for the high position.

Multiple variants:
01 Duct with wings to cover up cables, also directs air from a side mount fan towards the CPU.
02 Duct with wings to cover up cables.
03 Duct only.

May need to drill out existing holes to screw in the HDD 'pegs'. I used a 2mm drill bit and then a 2.5mm or 3mm drill bit to 'debur' the hole.

Tinkercad link: https://www.tinkercad.com/things/kNAW2wd6LXH




Cooler Master NR200 GPU Exhaust Fan Duct

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow