I wanted a RAM mount adapter to use my uAvionix (ForeFlight) Sentry Plus ADS-B device on my powered parachute. It is compatible with the 1-inch ball-mount series from RAM Mounts.

Requires a 1-inch 1/4-20 machine screw for mounting. Recommend stainless steel.

Designed with "ears" similar to the stock mount, but with additional holes to tie a safety lanyard in case the print fails.

Printed in Siraya Tech Blu Nylon Black Resin at 50-micron layer height on an Anycubic Mono X resin printer.

uAvionix Sentry RAM Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3024408.

I really liked the [original design](https://www.thingiverse.com/thing:2855715) by woundedknee and wanted to mount my [Trail Tech Tachometer/Hours-meter](https://www.amazon.com/gp/product/B01GTP6ORC/) next to the mirror. This remix just adds a little extension to the mirror holder, and also adds a third zip-tie holder. The backside is prepared for the TTO with holes ready to accept the M4 nuts needed to mount it.

Just like in the original design, this was also modeled to fit the [Air Conception Nitro 200](http://www.aviatorppg.com/air-conception.html) throttle and cable, but will fit almost any PPG cable. The round portion is still designed to fit a 2" blind spot mirror commonly available, and I used the suggested [Ampper brand version](https://www.amazon.com/gp/product/B01C0CY3US/) found on Amazon. The pack I ordered came ready-to-install with pre-applied 3M adhesive strips.

Assembly is completed using two (2) M4x16 bolts and two (2) M4 nuts (they are fully-captured in the back side of the model) to mount the TTO meter.

Paramotor Throttle - TTO + Mirror Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4436032.

This is a remix of my previous design. I was asked to model this to fit dual TTO Gauges in a horizontal configuration.

Just like in the original design, this was also modeled to fit the [Air Conception Nitro 200] throttle and cable, but will fit almost any PPG cable. The round portion is designed to fit a 2" blind spot mirror commonly available, and I used the suggested [Ampper brand version](https://www.amazon.com/gp/product/B01C0CY3US/) found on Amazon. The pack I ordered came ready-to-install with pre-applied 3M adhesive strips.

Paramotor - Mirror + 2 Gauges (horizontal layout)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4360750.

This is a GoPro mount base designed for use on a paramotor - specifically, the Air Conception Nitro 200. This is designed to mount behind and above the pilot to capture video from a unique angle of flying.

To mount this:
- Remove the factory velcro strap from carbon fiber support rods
- Fit the mount over top of the cage netting
- Use four zip-ties to secure the mount to the cage and support rods
- Re-install the factory velcro strap below the mount

Paramotor GoPro Mount - Air Conception Nitro 200

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4313878.

I designed this because I wanted a chest-mountable GoPro platform so that I could see and use my cellphone while flying my paramotor. In the current form, this platform extends about two-thirds of the way up the back of my Google Pixel 3. I did this so that the fingerprint sensor and camera would still be usable. I also added several holes to the platform to attach a leash/tether in case the base breaks or anything else goes wrong.

To mount the phone, I used 2-inch wide 3M VHB tape to attach an ultra-thin case to this design. This securely mounts the case, and ensures the phone won't fall off in-flight! I have tested this on numerous paramotor flights and it works great.

I have this mounted to a MOLLE chest harness using my other [remixed design for a MOLLE GoPro base](https://www.thingiverse.com/thing:4313853), and a standard "curved" GoPro mount. It allows me to flip the phone up for protection during takeoff and landing - this reduces the chance of flopping about or shearing off the GoPro mount.

GoPro platform for phone

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2786070.

This is a support structure to prevent accidental activations of the large PTT button on the Sena SR10. This 3d-printed supportive shell is hard-mounted to the unit using four M3x8 machine screws.

**Why?**
The Sena SR10 allows a user to have an externally-mounted, remote push-to-talk (PTT) switch. This is nice because it allows you to easily throw the SR10 into a pocket, bag, or pouch during transport. However, the external PTT does not disable the larger, on-unit PTT button. Because the on-unit button is so large, it can be accidentally depressed when in a pocket or bag - resulting in an unwanted open broadcast channel. This box creates a shell around the SR10 to help prevent accidental presses of the on-unit PTT button by recessing it below the 3d-printed surface.

**Assembly**
1. Align the enclosure openings with SR10's USB and external PTT ports
2. Slide the Sena SR10 into the 3d-printed enclosure
3. Secure the enclosure to the rear of the SR10 with four M3x8 machine screws.

Sena SR10 - PTT Preventer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4313853.

This is a remix of the awesome [MOLLE GoPro Mount](https://www.thingiverse.com/thing:2006335) made by [GouldShaw.](https://www.thingiverse.com/GouldShaw)

The original works great for normal camera mounting, but I needed more support for my application. I am using this on a MOLLE chest-rig while flying a paramotor and have designed a custom phone mount for a GoPro base. This creates a lot more rotational stress than just a normal GoPro, so I added an extended arm that slips under a second row of webbing for more support. I have also added two holes in the middle of the extension arm for a tether/leash - just in case.


MOLLE GoPro Mount + Extra Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4711285.

This is a riser/foot to elevate the Mac Mini for better airflow. You will need to print four (4) of these. This was designed for the corners on the 2018/2020 Mac Mini, and I do not have an older model to confirm if it fits those or not.

Mac Mini Riser

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nathan.bittinger

Achievements

Seedling