Here's a Multiboard inspired laptop stand. In addition to the attached STL's, you'll need

• Double Sided Snaps (Part B)
• Tile Ring
• 10 mm Mid Thread, Folded-Bolt

Print Settings Most parts work with PLA/PETG at 0.2mm layers, 3-4 layer walls, 20-30% infill. STL models include supports where needed. Print the TPU Hex Foot with TPU or similar.
What's Special The 45 degree Tile Base has the inclined Tiles spaced on 25mm increments vertically and horizontally. You can combine different number and sizes of the Double Snap leg extensions (25mm & 50mm included) to change the height of the stand. The TPU feet insert into a double sided snap part B to help prevent the stand from sliding around.