This is a simple little shim to help mount a door hinge slightly further away from the door frame stop moulding. You tuck it behind the door hinge and the little lip pushes the door farther from the stop moulding. 

Or it could push the door closer to the stop moulding, if you put it on the door side of the hinge. I have printed a bunch of these for most of the doors in my house, and each one takes about 11 minutes on my Ender 3. 

This is available as a parametric model on Onshape [here](https://cad.onshape.com/documents/e7bbc7581f78bdd9cb93cbd1/w/8ea551c93abfbfd46ae7aaf3/e/942411dc67211e2f269e2feb?renderMode=0&uiState=669dd1fe66fe196d2b5d2c06).

More images on my blog [here](https://www.ericmakeseverything.com/?p=1762).

3.5in 3-hole door hinge stop shim

Door Hinge Spacers.Part Studio 1.3.5in 3-hole stop shim.stl

This is a 3 inch (7.6 cm) diameter, 0.2 inch (5 mm) thick bumper plate to protect a wall from being hit by a door handle and potentially cover up existing damage. It attaches using #4 screws that can be placed in an arrangement of hole locations to avoid the original damage. The plate can be removed without damaging drywall beyond the holes needed for the drywall anchors. 

Door handle wall bumper

3 in dia #4 Screws - Plate.stl

This is a new version where the shaker is designed to hold an off-the-shelf salt or pepper shaker refilled with MSG. A $1 salt shaker is used to actually hold the food, so the outer shell can be made out of many kinds of plastic and doesn't need special treatment for food safety. There are now 2 parts: the outer shell and a plastic plug for the bottom. I would recommend putting a piece of foam or something in the bottom: the cavity for the shaker is intentionally a loose fit.

Blog post about the new version [here](https://www.ericmakeseverything.com/?p=1683).

---

Every time my wife or I made egg fried rice we had to get a sketchy plastic bag out of the cabinet, portion MSG out by hand, and sprinkle over rice. Haiyaa! It was so messy.

We like Nigel Ng's comedy and his Uncle Roger YouTube series, so my brother [Morgan Jones](https://morgan-jones-art.com/) and I worked together to make my wife this MSG shaker shaped like Uncle Roger's stylish polo shirt. Fuiyoh! Now it's always easy to measure out the right amount of white powder to make everything better.

King of Flavor MSG Shaker

Twist Locking Plug.Locking Insert Plug.Plug.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5461133.

This stand holds the Steam Deck at a 10 degree angle and has a replaceable USB-C dock mounting bracket. The base is a few millimeters less wide than the space between the grips, so it also keeps the system centered on the stand. 
The dock is a [CableCreation 7-in-1 USB-C Hub Multiport Adapter](https://www.amazon.com/dp/B08FWMWGTD). The mounting bracket is attached with 5mm-long M2.5 screws and can be removed and replaced with something else, like a different mounting bracket or a piece of wood with a dock zip tied to it.

I have a [blog post with more details](https://www.ericmakeseverything.com/?p=1061). You can can also access the [parametric design in OnShape](https://cad.onshape.com/documents/456508f8184bf4c92871add1/w/24f65ab944ae0e9922acb26b/e/46ade576edd00ae904bd8dcd?renderMode=0&uiState=62f817af48659d7ff700590b).

UPDATE: This Cable Creation dock has insanely bright TX/RX LEDs on the network port. I modified the bracket design to cover them up and added a plug cover to block light from shining out to the front when the Steam Deck isn't there.

Steam Deck Stand with Removable CableCreation Dock Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5510397.

These pegboard holders can be used to hold a variety of game controllers. I designed it specifically for Steam Controllers, Nintendo Switch pro controllers, and Xbox360 controllers. 

You can access my parametric design on Onshape [here](https://cad.onshape.com/documents/eb5d251da7ced4ae0356ed51/w/bf8b3c5270bd707b1c93d5b8/e/2fcc179052d83b6bf3372210?renderMode=0&uiState=631fed66e39eec751b4753bf).

Pegboard game controller holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5935499.

This stand holds the PineTime charging cradle at a 5 degree angle from vertical and directs the USB cable out the back. The charging cradle snaps in from the back, and can be removed with difficulty but without damaging the cradle or stand.

You can fork this design on Onshape [here](https://cad.onshape.com/documents/f438945c1719f8cd58f4ccec/w/d029829bb54c189bfceb6644/e/b5cddd793e35953bf2045833?renderMode=0&uiState=6421baa02986341f58df5cf2).

I have a blog post with additional pictures [here](https://www.ericmakeseverything.com/?p=1370).

PineTime charging cradle stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5510413.

This is a bracket used to hang a piece of pegboard from the top of a cabinet with crown molding that would make it hard to use a bracket with a regular shape to hang pegboard.

It works for cabinets with this common shape of crown molding. There are small standoffs to keep the board lying flat against the side of the cabinet. 

I wrote a [blog post](https://www.ericmakeseverything.com/?p=1093) with some more details. You can access the parametric designs for the [hanger](https://cad.onshape.com/documents/eb5d251da7ced4ae0356ed51/w/bf8b3c5270bd707b1c93d5b8/e/a327486fbc33ea431893229f?renderMode=0&uiState=631ff007e39eec751b475855) and [standoff](https://cad.onshape.com/documents/eb5d251da7ced4ae0356ed51/w/bf8b3c5270bd707b1c93d5b8/e/b43919f4ac1b2e0b41d8291b?renderMode=0&uiState=631ff03ee39eec751b47587c) from my [pegboard accessories Onshape Project](https://cad.onshape.com/documents/eb5d251da7ced4ae0356ed51/w/bf8b3c5270bd707b1c93d5b8/e/a327486fbc33ea431893229f?renderMode=0&uiState=631ff157e39eec751b47595f). Please feel free to fork them and modify the sketches to work with your cabinet.

Pegboard hanger for cabinets with trim

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4851449.

This is a lamp stand compatible with the awesome Ikea Tertial desk lamp. It fits into standard 1-inch-spaced pegboard with 1/4-inch holes. The fit is loose enough that it is possible to carefully move it around without damaging the plastic pegs.

~~The support for the pegs may be a bit tricky, but I have not had a print fail on my Ender 3 Pro with 0.2mm layer height and full overhang support.~~

I had a lot of problems with this design depending on the plastic that I used, so I redesigned it to be much stronger. Version 3 prints as 2 parts, and once the joints are cleaned up it can be press-fit together. 

Here it is in my [Onshape project](https://cad.onshape.com/documents/eb5d251da7ced4ae0356ed51/w/bf8b3c5270bd707b1c93d5b8/e/a6cc7939781d64e059ac8c1c).
Here is a [blog about it](https://www.ericmakeseverything.com/?p=1468).

Ikea Tertial Pegboard Lamp Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5984204.

I'll be headed to the Rocky Mountain Rep Rap Festival in Loveland tomorrow, so I thought I would commemorate it. This is a Hextraction tile for use in [Zack Freedman's](https://www.youtube.com/@ZackFreedman) [board game](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Beta%20Basic%20Tiles%21%20A%20Hackable%20Tabletop%20Game%20from%20the%20Gridfinity%20guy%21-818411) that I am excited to play some day. I used his Fusion 360 project as a base and finished everything up in Blender.

"But this tile is so basic, it won't help me crush and demoralize my victims!" Whatever, it's mostly for style points. 

The top side is the topography of the location of the event, the Budweiser event center in Loveland, Colorado! The elevation difference is magnified relative to the latitudinal and longitudinal scale to make it more visible, and the slot aligns perfectly with the I-25 freeway so you can simulate traffic on the I-25 corridor! You can see the outline of the event center on the east side of the freeway. On the back, there's a version of the logo for the 2023 RMRRF that I modified to be so simple that it will even print reliably on my shitty partially tuned Ender 3.

Loveland is the home of [Aleph Objects](https://www.ics.com/success/aleph-objects) and a lot of neat 3D printing. You might say this is a logical next step for a city known for its art and sculpture casting.

I recommend printing at a low layer height to really get good topographical definition. I went with 0.12mm, but I'm sure it would look better if it was done with an SLA printer.

Rocky Mountain RepRap Festival 2023 Hextraction Tile (not at all official)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4844056.

This is a sleeve case remix tested with a Raspberry Pi 3. There are V-rail clips that allow it to snap into the 3D printer beams. 
The case body is remixed from "Sleeve Case for Raspberry Pi" by walter. The faceplate is changed to be screwed in place and the vents are changed.
The snap tabs are from "Ender 3 Cable Chain" by johnniewhiskey. 

It should be printed with supports for the V-rail clips, other regions should not need supports. 

Small screws are used to hold the faceplate on. I used scrap screws, which I measured to be 3-48 x 1/4".

Design was done in OnShape, so if you want to fork it you can get my [parametric model](https://cad.onshape.com/documents/feb34ea5e3fc9eb0b7f340c3/w/af94d01fc71885471eebcf48/e/3c295f10c844e3f80efce792).

Raspberry Pi 3 Sleeve Case with V-Rail Clips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5981855.

This is an adapter so that you can use a normal doorknob as a one-sided dummy doorknob. The part called "bolt hole arm" inserts in the existing hole on the side of the door and locks into the insert to prevent it from turning when someone twists it.
You can read more about this design on [my blog](https://www.ericmakeseverything.com/?p=1389).

This design supports the Kwikset knobs that I had on-hand. If you want to modify the design for a different doorknob shaft profile and length, fork my [Onshape project](https://cad.onshape.com/documents/e3d2d412399274e6be667b15/w/32b4e6876868ee062175f858/e/ac9219a76c069907db2d68ea?renderMode=0&uiState=6441651c0330907a2dd33e05). 

No-turn dummy doorknob adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4849581.

This is a stand for a Nintendo Switch that takes advantage of the dock interfaces to provide a solid connection to the device while not covering up important parts like the USB C port so that it can be charged while in the stand. It should fit just snugly enough that lifting the console will also just barely lift the stand, and the locating geometry keeps the device from vibrating or sliding out of place.

No support material required. Not tested for fit on Switch Lite.

Nintendo Switch Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6000725.

This is a clamp for holding a beer/wine thief siphon pump. It has a little arm to kind of hook onto the bung of a carboy or the side of a bucket and hold the siphon at a level. I printed mine out of PLA, but the durability of the arm could be improved by printing it out of something stronger.

You can find the Onshape project for this part [here](https://cad.onshape.com/documents/0be1dfb8af7d7e4fc7c39e9a/w/581ed2dc598551e80888e1e1/e/529141b6e3005e5be1da571f?renderMode=0&uiState=644f4243ae180f2f42770cca).

Brewing siphon pump clamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6000728.

This is a dummy insert for a Cornelius keg ball lock connector with a hole for liquid to flow through. It's really useful for cleaning out keg lines without taking apart the fittings.

Cornelius keg ball lock fitting dummy

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mysterioustrashninja

Achievements

Seedling